Jump to content
SAU Community

Recommended Posts

Hey guys i am getting sick of everything i have laying around from the accident where my r33 gtst series 1.5 was written off. I have

Full set of advan Light wieght 17 *8's for the front and 17*10 on the rear with center caps. Front tyres are near new rears need replacing. These are a 5 stud partner but i do not know the offset i have shim spaces for the front to clear the callipers there a 10 mm spacer also a full set of wheel nuts.

Front head lights In good nick no disscolouration

Rear diff craddle complete with a good diff no noises and still very tight with hicas rack as well

Exhuast 3 inch jasma system cat back including 12 month old cat

Steering rack

ABS accuator

A/C condensor

Stub axels complete set

Front Lower controll arms

wiper arms and motors front and rear

radiator in good nick

and other little bits and pieces

Now guys i know this stuff all up is worth more than alot $1000 there is nothing wrong with the parts that i have listed i just want them out of my hair. I do have pictures and i will up load a few tomorrow.

Few free to email me on [email protected] or ring on 0423144911

thanks

Link to comment
https://www.sau.com.au/forums/topic/236052-r33-gtst-parts-cheap/
Share on other sites

could you send a price for the heady's my way as well ? Also i can't see where your from, i'm on The Goldy so will need to know if i have to pay for any postage costs..

Cheers mate.

heres some pics of the exhuast

Up date on wheels sorry the wheels are 17*8's and 17*9's not 17*10's tyre shop told me they where 17*10s when i checked on the wheel there 17*9 sorry about that

post-43710-1221745589_thumb.jpg

post-43710-1221745659_thumb.jpg

post-43710-1221745763_thumb.jpg

Hey mate,

Do you still have the diff for sale?

If so let me know. I need the crown wheel and pinion out of it, but am willing to buy the complete unit. Where are you located?

Thanks

Shaun

0414972596

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...