Jump to content
SAU Community

Recommended Posts

Does anybody know of anyone who makes a panel to fit into a slot in the radio section of the dash to accommodate gauges? Like the ones in autechs. I want something to fit a few small autometre gauges in there.

Was going to make up something nice out of some polished aluminium but if something already exists that would suit my current motivation level a whole lot better :P

Link to comment
https://www.sau.com.au/forums/topic/236764-single-din-gauge-holders/
Share on other sites

Hmm.. I brought my din insert from egauges.com it was about 20 bucks US and fits ok (depends on where you put it) - I've got mine at the bottom (so climate control, stereo then gauges)....you will need to file/sand down the holes a little bit more to fit the gauges (52mm) and if you are going to put it in the middle slot then you will need down sand down the back of it as it extends a little bit...i'll get a pic up on here - my gauges stick out a from the facia (I don't want to cut up the surround to flush mount it

It's really much on what you want to do and what size you want to go?? Polished Aluminum would be nice but the shine in the sun would be annoying and potentially dangerous

Yeah the shiny-ness was the only thing worrying me. That would be good if you could post a quick pic. I found these ones on ebay..

http://cgi.ebay.com.au/NEW-single-DIN-trip...idZp1638Q2em122

Is your's similar to that? with the staggered sort of layout. Can't really go wrong for that sorta price

52mm gauges are too big to neatly fit within a DIN space.

the cleanest solution is the defi DIN gauge unit. stand alone three 40mm gauges,two temps and one pressure. available in green,white or red. if you're in Sydney, revolution race gear have one in red in stock atm,$550 if I remember right.

my girlfriend has one in the dash of her ae111. works very well.

Justin...

52mm gauges are too big to neatly fit within a DIN space.

the cleanest solution is the defi DIN gauge unit. stand alone three 40mm gauges,two temps and one pressure. available in green,white or red. if you're in Sydney, revolution race gear have one in red in stock atm,$550 if I remember right.

my girlfriend has one in the dash of her ae111. works very well.

Justin...

I got a piece of 4mm perspex, cut it to fit single Din space, then drilled three holes for the gauges. Too easy.

You will hve to open up the holes a tad. Get a drill bit with a rotary burr on the top of the shank.

Mine is in the middle slot.

52mm gauges are too big to neatly fit within a DIN space.

the cleanest solution is the defi DIN gauge unit. stand alone three 40mm gauges,two temps and one pressure. available in green,white or red. if you're in Sydney, revolution race gear have one in red in stock atm,$550 if I remember right.

my girlfriend has one in the dash of her ae111. works very well.

Justin...

Not necessarily true, I managed to get my Defi's in there and it looks OK - not perfect, but most people don't notice that they're not perfectly spaced out.

DefisintheStagea1.jpg

Defis003.jpg

I would have gone with the Defi DIN cluster, but you can't specify which meters will go in there, so I went with separates so I could choose to my needs.

I got a piece of 4mm perspex, cut it to fit single Din space, then drilled three holes for the gauges. Too easy.

You will hve to open up the holes a tad. Get a drill bit with a rotary burr on the top of the shank.

Mine is in the middle slot.

I got an off-cut of Poly-Ethylene from a plastics mob here in Sydney, and it cost me nothing, luckily! My old man and I measured and trimmed it down, and got a hole-saw to cut the holes, which took quite a bit of time. Another problem is that it's impossible to find a 52mm hole-saw, so like Hugh mentions, you have to file or burr the holes out until the gauges fit. Keep the holes a bit tight too, that way they won't budge while you're driving, and will be much harder to steal if anyone should ever attempt it. I made some small brackets for the back to secure the gauges to as well, just as added protection.

Not necessarily true, I managed to get my Defi's in there and it looks OK - not perfect, but most people don't notice that they're not perfectly spaced out.

DefisintheStagea1.jpg

Defis003.jpg

I would have gone with the Defi DIN cluster, but you can't specify which meters will go in there, so I went with separates so I could choose to my needs.

I got an off-cut of Poly-Ethylene from a plastics mob here in Sydney, and it cost me nothing, luckily! My old man and I measured and trimmed it down, and got a hole-saw to cut the holes, which took quite a bit of time. Another problem is that it's impossible to find a 52mm hole-saw, so like Hugh mentions, you have to file or burr the holes out until the gauges fit. Keep the holes a bit tight too, that way they won't budge while you're driving, and will be much harder to steal if anyone should ever attempt it. I made some small brackets for the back to secure the gauges to as well, just as added protection.

Mine is just like that

Yeah the shiny-ness was the only thing worrying me. That would be good if you could post a quick pic. I found these ones on ebay..

http://cgi.ebay.com.au/NEW-single-DIN-trip...idZp1638Q2em122

Is your's similar to that? with the staggered sort of layout. Can't really go wrong for that sorta price

You'll find the angled ones don't quite fit properly and most likely you need to trim the fascia to make it fit.

fergo308 - while the defi dim gauge set is good - the major problem is that you only get two temps and a pressure....nothing else...I've got boost, oil temp and volts.

Goldzilla's idea is pretty much the best way to fit 3 gauges on there (i've got mine the setup like that but the other way around - gauges on the bottom and stereo above.

  • 1 year later...

sorry to bump old thread, but im just wondering, goldzilla, before you fitted these gauges, you supposed to fit a panel for your alpine 9833? like the one surrounding the head unit to cover the holes? can you still fit that in anyway so it will look so much better?

Defis003.jpg
sorry to bump old thread, but im just wondering, goldzilla, before you fitted these gauges, you supposed to fit a panel for your alpine 9833? like the one surrounding the head unit to cover the holes? can you still fit that in anyway so it will look so much better?

Can't do it, unfortunately, as the surround that came with the head unit is too big to fit between the dash surround as it is, and too fragile to cut down to squeeze in there... It'll probably break as I try to trim it.

The Defi Din gauges are really good. but because it's two temp and and one pressue - it's of no value for me...Maybe down the line when i'm sick of my gauges and decide to mount my boost gauge somewhere else

David (Airbox) looks very neat...is all the gauges working and was it a pain to install??

all guages are working, I just need to fit the oil temp sensor, which I have, but am waiting until i fit an oil filter relocation kit. It was pretty straightforward to fit once I had worked out the wiring, had to file the stagea cage a bit and cut off the lugs which were attached to the guages.

Edited by airbox

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...