Jump to content
SAU Community

Recommended Posts

But i had all the bushes replaced at the start of this year, with superpro ones. I know the blokes at pedders, so thats where i take my car all the time. they even allow me in the workshop to giv em a hand and see what they do. I had my coilovers installed there last week, and went in on saturday and we took the bushes out and regreased em'. Thats why i dont understand what the noise is.

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4147897
Share on other sites

Yeh . I only noticed it after. We looked for it everywhere, but couldnt find what it is. I dunno. Im goin back this weekend to giv everything a once over. I just thought it could be sumthing obvious. It only does it when i corner quick.

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4153640
Share on other sites

Yeh mate. S2 R33. I got told that it could be the steering rack. The situation was; i went into a double laned roundabout. The c*&t in the left lane cut across, so i swerved right, and the right hand side hit the gutter. Thats when i replaced the suspension and a couple of little bits. Yeh, i got told theres no cv joints. Could it be the steering rack? Are they expensive?

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4158576
Share on other sites

  • 2 weeks later...

I also have this issue with my 33. I had a checkup at pedders today, castor bushes are gone and a small amount of play in the rack is all they found on the front.

I also would like to know how much a rack would cost.

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4181958
Share on other sites

But i had all the bushes replaced at the start of this year, with superpro ones. I know the blokes at pedders, so thats where i take my car all the time. they even allow me in the workshop to giv em a hand and see what they do. I had my coilovers installed there last week, and went in on saturday and we took the bushes out and regreased em'. Thats why i dont understand what the noise is.

If the most recent thing that was installed was the coilovers then perhaps that is the issue? Either the top pillowball or the spring? Other then that if you lowered the car when you put the coilovers in you may be putting new stress on worn parts that you wouldn't have noticed before.

Ryan

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4183764
Share on other sites

From memory a mate bought a rack for an R34 for about $150 from a wrecker.

Sounds like a possibility. If you jack up the front of the car, front wheels off the ground, try pulling the wheel back and forth in the same directions it steers to feel for free play.

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4183775
Share on other sites

Hey guys..

One thing it might be that I dont see mentioned is the steering wheel has a piece of metal that absorbs vibration mounted inside it. This can fall out of its mounting, then when you turn the wheel one way or another sometimes it will clunk over to the other side of the steering wheel.

Sounds like it might be what you are feeling.

Found the related thread on how to fix it:

http://www.skylinesaustralia.com/forums/No...ing+wheel+clunk

Link to comment
https://www.sau.com.au/forums/topic/236975-clunk-noise/#findComment-4183804
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...