Jump to content
SAU Community

Recommended Posts

Well Seeing as i can't update the price on the old thread i decided to make a new one.

1996 R33 NISSAN SKYLINE GTST

Mileage is 105,000 with 100,00 service completed

Registration untill 26th April 09

Fully Engineered aka police friendly

EXTERIOR

Unique and rare Tommi Kaira front bar

Type M factory side skirts and rear Pods

Stealth rear wing

Nismo clear side indicators

18” Shadow Chrome Work cr Kai 235 front 255 rear

INTERIOR & AUDIO

CF dipped dash

Carbon gear stick

Razo pedals

genuine nissan floor mats

Greddy Boost guage with greddy pillar mount POD (has memory setting, electronic style)

Greddy full automatic turbo timer (all features) black

Clarion VRX766VD DVD/MP3/CD Touchscreen 7" Single DIN TV.

Clarion CCA673700 ipod Video Cable)

Cadence 3 way 6x9's rear

Cadence 4 way 6" fronts

Pioneer GM-6100F 600W 4 channel amp

Pioneer 305CBOX2 12” sub

New betttery

Mongoose M80 alram/immobiliser with window lifting module

15% tints by eagle tints/alarms

Satellite tracking

ENGINE MODS

Greddy FMIC 600x300x80

Custom 3” exhaust <90dB

Custom dump pipe to suit GT30R turbo

New Garrett GT30R low mounted turbo

1 bar actuator

Greddy oil catch can

all braided oil lines

Apexi Power FC computer

Eboost 2 electronic boost controller

Z32 AFM

blue silicone intake piping

Sard 550cc Fuel injectors

Sard Fully adjustable rising rate fuel pressure regulator

New Iridium plugs (under 1000km old)

Splitfire Coilpacks

500hp fuel pump

Greddy Type S BOV

Custom air box

Apexi air filter

Exedy 4puk brass button clutch 2000 kms old

Also comes with spare kakimoto exhaust (lovely note, although removed during engineering process)

SUSPENSION & BRAKES

Cusco front and rear strut braces

Tein height and damper adjustable coilovers

Fully adjustable castor rods

upgraded DBA4000s front disc rotors with ferodo pads

upgraded RDA performance rear rotors with bendix advance pads

(all calipers are sprayed red with the silver nissan logo)

It made a safe 260RWKW tuned by MRC at Castle Hill on 18psi. This was acheive with low timing too. If i get around to it i will have it re-run with some more timing

235RWKW on 13psi.

The car is serviced every 5000km without fail and has nothing but elf excellium fully synthetic oil , diff and gear box oils are royal purple.

The previous owner spent a lot of money modifying this car and i've spent $12,000 (receipts to prove) in the last year alone.

No rush to sell at this time

I'm after $19,000 but will take parts off to lower the price.

I am contactable via pm or by 0421866768

Cheers Greg

No test pilots or time wasters please

PICS

dsc0011uo7.jpg

dsc00377ia1.jpg

02082008051bv4.jpg

20082008058rg5.jpg

Link to comment
https://www.sau.com.au/forums/topic/237128-white-r33-s2-260rwkw/
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • 4 weeks later...

Wow Greg thats a good price for your car mate.

Hmmm, lets me get this right, i just sold my 97 model just a couple of days ago for $15200 and it only had 177.8rwkw. You guys can get the same quality car with 82.2rwkw more for an extra $1300, thats gotta be the cheapest 80+ killer wasps you can get!!!! Great car for the price and good luck with the sale mate!! Free bump for a hot arse 33!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...