Jump to content
SAU Community

Recommended Posts

hey how much does it cost to freight stuff over from japan by

- air

- sea

is there any guarantee that the stuff will get here if it is put onto a boat? i mean, our goods are not subject to rape and torture by wharfies (like our poor cars are on the docks when they first arrive) right?

My question is sorta OT, sorta not.

I'm planning on going over for a year, maybe 2 to work when I'm done with my English/Education degree. Girlfriend and I are planning on buying a car each. What I am wondering is, is it possible to fill your car up with bits and pieces? Like buy a R32 GT-R, and chuck a turbo kit, some seats, coilovers, spare rims, R34 six speed, R33 brembos, bits and pieces inside? All wrapped up to keep it nice and clean of course. Will you get taxed on all that stuff thats in the car? E.g if its for my own spare parts on my personal import car?

I wouldn't want to have it all stolen when I get back either. I'd like to buy something and bring it home to do the modding myself. Plan to get a R32 and a JZA80 supra.

cheers,

floody

floody,

I think if you check with Customs on this but I have done quite a few trips o/s and in all the info that I have read it states that if you are out of the country for longer than a certain period of time, (used to be twelve months) no duty was payable if you could prove ownership of the goods for that period. However as I said, check with Customs I'm sure that they will give you the correct information.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...