Jump to content
SAU Community

180sx RB25 conversion, anyone done it?

wannaQik180

By wannaQik180,
in Engines & Forced Induction

 Share

Recommended Posts

EVOIV Community Regular

EVOIV

Posted
Posted

If you only want less than 200rwkw (I say only, cos although it's still damn fast...lotsa people on this forum are well over 200rwkw) I would stick with the SR20 engine. The SR20 is a very responsive engine. Just need to pick a correctly sized turbo, and for around the 200rwkw mark I would go for something like a GT2530 or something. Should be able to hit the mark on a bit over 1bar, and not much laggier than standard. For a bit more power, but more lag...go the GT2835 which is supposed to be damn nice for the SR20. Any larger and I reckon you won't like it as it's too laggy. Also, the TD06 can be a nice equivalent too.

gtrhybrid Contributor

gtrhybrid

Posted
Posted

The biggest problem for my swap was the wiring. The diagrams that I have showed r32 and 180 have very different wiring setups. Once you find all the powers and grounds and get all the relays working you shouldnt have a problem.

PS I would go with custom mounts rather than the r33 x member so the engine will sit down and back a little more.

gtrhybrid Contributor

gtrhybrid

Posted
Posted
Originally posted by huks

How fast 1/4 would a s13 with a stock standard rb25det run?

should be able to hit 12's without a problem cuz mine has a rb26dett and it runs 12.3 @ 118mph with upped boost but dont forget I have 205 street tires and no lsd.

Bozz Proficient

Bozz

Posted
Posted

RB20DET deck height is considerably shorter than 25

RB20DET does not need modified mounts in S13, RB25DET does to enable the engine to sit lower so the bonnet can close.

RB30 deck height again is taller than 25

s13s15 Apprentice

s13s15

Posted
Posted

ummmm....i dont see the point???

back to the main comment/q's wateva...i'd go for the rb20det ova the rb25, the rb25det screws ur 50/50 weight hardcore

60/40 or worse ive been told

personally id just go the rb20, spend the money u saved on the rb 20 on mods and it'll b sweet assssssssss....just my 2 yen

dabigbolf Proficient

dabigbolf

Posted
Posted

well if you dont want to butcher your bonnet use custom mounts.

he clearance for my bonnet is a fair bit.

do it which ever way you choose to. both work.

as for weight balance, throw that out the window.

speaking from experience having a light as end, is all the fun. just dont get silly in the wet.

Bozz Proficient

Bozz

Posted
Posted
Originally posted by s13s15

ummmm....i dont see the point???

back to the main comment/q's wateva...i'd go for the rb20det ova the rb25, the rb25det screws ur 50/50 weight hardcore

60/40 or worse ive been told

personally id just go the rb20, spend the money u saved on the rb 20 on mods and it'll b sweet assssssssss....just my 2 yen

Excuse me? You've weighed and driven RB20DET and RB25DET equipped S13's?

Didn't think so.

The RB25DET is only slightly heavier than the RB20DET, although it is a far superior engine in most ways.

Perhaps you should question what you have been told by dickheads who dont know what they're talking about and dont repeat said rubbish by passing on your 2 yen.

Simonster Proficient

Simonster

Posted
Posted
Originally posted by Bozz

RB20DET does not need modified mounts in S13, RB25DET does to enable the engine to sit lower so the bonnet can close.

I didn't modify my engine mounts and it fits just- gotta custom plenum :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...