Jump to content
SAU Community

Recommended Posts

I'm not driving the car much on the street anymore- suspension is too harsh, exhaust too loud etc. for it to be very comfortable to drive. Just going to use it for the odd trackday, so not concerned about drivability anymore. If I was, I wouldn't remove the 2530 :)

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-433868
Share on other sites

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

ok, i might be opening up a can of beans that'll spill into what should be another thread but........ what would be cheaper, if you wanted to have a weekend car, and a track day car..... a worked gts-t, or a worked gt-r, both having say...... 600hp at the engine? or would there be too many variables involved? just running on my train of thought here

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434569
Share on other sites

Hah now that question deserves a long, opinionated answer...

Depends on size of budget (is $5,000 cheap or is $30,000 cheap?), driving style, access to facilities or contacts, maintenance budget etc. etc. You could write a book on it (I'm sure someone has).

Bottom line (in my humble opinion, and stated a million times in other posts)..

* GT-R's cost more initially, increasing performance costs less, marginally higher upkeep

and the inverse for GTS-Ts. Get a 180sx - cheap to buy, cheap to improve performance, cheap to maintain.

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434575
Share on other sites

Kinda got sidetracked - as for some dyno figures...

Rick Shaw has a 2540 on his personal car (it's up for sale btw, as you would expect it's immaculate and everything has been rebuilt) and has dyno'd ~230kw at his shop. That was at 1 bar boost - his standard fuel system limited this.

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434672
Share on other sites

Ezekrael

as far as clutch choice goes, a search should reveal all the info you need.

for around 900 fitted got me my extreme single plate ceramic button clutch with sprung centre. many members are using this clutch and its very usable. I think its good for 450hp, which means it should be fine unless you upgrade your turbo again and shoot for over 250rwkw.. then again whatsisname has over 250rwkw and that was his clutch choice too.

evo- fuel pumps are INTERNAL on 33's and yes can still hear buzzing. No std turbo not good for 230rwkw.

for HKS relevance heres my GT2530. i am assured by the supplier (a friend of a friend, who is the friend of the guy who bought the turbo new in japan!) that this turbo has done less than 2000km's in japan, cost me 1800bucks. Took it to ATS for inspection and they confirmed its perfect.

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434710
Share on other sites

Originally posted by SLY33

evo- fuel pumps are INTERNAL on 33's and yes can still hear buzzing.  No std turbo not good for 230rwkw.

SLY 33, how loud is your 044?

- mine I can only just hear it with the ignition on but engine switched off. I have a nismo exhaust with dual muffler so it just purrs at idle, but I cant hear the pump at all.

I wouldnt be in a hurry with the extreme clutch - mine was good for about 6 months then it started dying. I know a couple of other guys who had problems running just over 300rwhp.

I ended upgrading to a os giken twin, wish I had gone that way in the first place.

Nice score on the turbo by the way, you'd have to be happy:)

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-434911
Share on other sites

the buzings not that loud but when the exh isnt booming i can hear it. During summer when it gets warm the buzz gets quite loud.

Apparently the extreme clutch doesnt like to be slipped, when i got mine i was told that if i tried to slip it each take off it wouldnt last long, and to just let it out and it would be fine. ive had mine about 6 months, lots and lots of launches, no troubles yet...

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-435061
Share on other sites

Steve: The one pictured is a 52T, but I also have a 56T trim. Actually, the one pictured is damaged (turbine wheel) but I hope to get it repaired soon, if it can be repaired. The 56T I used on my EVO4...how can you tell if it's the current or older model???

What's the difference with your turbo? Do you have a pic?

Link to comment
https://www.sau.com.au/forums/topic/2381-hks-turbo/page/4/#findComment-435573
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...