Jump to content
SAU Community

Recommended Posts

Hi Everyone,

I need your help, I have an r34 Skyline and some warning lights have come on the dash. They state HICAS, TCS OFF, SLIP and the Engine Light Symbol.

How can I fix this problem? What is the reason behind it?

Any help is greatly appreciated.

Kind Regards,

Dave

is it always on? like does it stay on all the time? or when you turn off your car and turn it back on does it dissappear?

if it stays on its best just to take it to a work shop asap.

My mates one happened like that awhile ago, turns on then when she turned off her car and turned it back on, its all off..

Edited by viet_boi

The HICAS, TCS OFF, SLIP and the Engine Light Symbol on my dash are lit up like a Christmas tree always... It's normal, just leave it :P And if it really gets you paranoid, take the dash out n remove the globe (why spend hundreds finding problems when you can just "cover them up") :miner:

In all seriousness, I wouldn't be too concerned... I'm not :down:

EDIT: Can provide photo evidence if you're in disbelief...

Yeah after reading the post above... prob not best to take my advice :) My car runs perfectly fine with those lights on, reasons will be a little different to yours.

HICAS - has been removed

TCS OFF - doesn't have TCS stuff anymore

SLIP - can't be slipping if it doesn't have TCS

Engine Light - I'd like to say it's only because of the missing AFM, but I'm pretty sure it's complaining about other stuff missing too...

this is just a guess but I would say a speed sensor

thats the common component of tcs and hicas

get someone to put it on a diagnostic and see what error code you get

i agree

mine did the same when i first got ma car

took it to the place i got ma car n ran a diagnostic n they jsut said one of the sensors were playin up n they just had to adjust s umthin n ever since then light hasnt' come on since:)

is it always on? like does it stay on all the time? or when you turn off your car and turn it back on does it dissappear?

if it stays on its best just to take it to a work shop asap.

My mates one happened like that awhile ago, turns on then when she turned off her car and turned it back on, its all off..

I start my car and the HICAS light is always on no matter what. The other lights (TCS OFF, SLIP and Engine) come on about 5 minutes into driving and then stay on until I turn my car off. If I leave the car for a short period and then start it up again, it only takes another 5 minutes for the lights to come back on even if the car is just idling. I don't thrash the car at all so i'm pretty devo and confused as to what is going wrong.

So far the next steps are to take the car in to a workshop and get them to look at the computer error diagnostics and go from there and to replace the coils with Splitfires as well as upgrade the spark plugs.

Does anyone have any other ideas? If this has happened to you or someone you know and you found out how to fix it can you please let me know ASAP, it would be much appreciated.

Kind Regards,

Davey

HICAS, the motor is probably screwed in the assembly... before you get too upset, undo the plug, spray it with contact cleaner n see if it works. If not, who cares - buy a $100 lock bar, put it in, and take out the globe (fixed - will actually improve the car)

TCS n SLIP, this is a bit of a rough one as it can light up for a few reasons... again, pull the plugs off the TCS motor n clean them. Then crawl under all 4 wheels (maybe just rear 2 I think) and make sure the wheel speed sensors are plugged in. Not having them plugged in will send the ECU crazy thinking your driving on a sheet of ice or something.

Engine light, your guess is as good as mine here... but all the essentials that would trigger it (AFM, Coilpacks, Factory Boost Sensor, Knock Sensors, Oil Level). As mentioned earlier, my light came on when we removed half the factory sensors (no use for them) - can't really help with this one. Although, I think you'd be able to use a process of elimination here (AFM shot = car run like poo, Coilpacks shot = car run like poo, Boost Sensor = irrelevant with aftermarket ECU, Engine Oil = check dipstick, Knock Sensors = dunno how to test sorry, assuming voltage output)

HICAS, the motor is probably screwed in the assembly... before you get too upset, undo the plug, spray it with contact cleaner n see if it works. If not, who cares - buy a $100 lock bar, put it in, and take out the globe (fixed - will actually improve the car)

TCS n SLIP, this is a bit of a rough one as it can light up for a few reasons... again, pull the plugs off the TCS motor n clean them. Then crawl under all 4 wheels (maybe just rear 2 I think) and make sure the wheel speed sensors are plugged in. Not having them plugged in will send the ECU crazy thinking your driving on a sheet of ice or something.

Engine light, your guess is as good as mine here... but all the essentials that would trigger it (AFM, Coilpacks, Factory Boost Sensor, Knock Sensors, Oil Level). As mentioned earlier, my light came on when we removed half the factory sensors (no use for them) - can't really help with this one. Although, I think you'd be able to use a process of elimination here (AFM shot = car run like poo, Coilpacks shot = car run like poo, Boost Sensor = irrelevant with aftermarket ECU, Engine Oil = check dipstick, Knock Sensors = dunno how to test sorry, assuming voltage output)

Hey, thanks satanic, your thoughts are greatly appreciated. I will check it all out.

Thanks

Dave

  • 4 weeks later...

I drove from Nowra on the NSW south coast to the north coast the other day and first the hicas light came on then the abs and then all the orange lights came on and then the speedo got stuck on 90 kmh and the tacho got stuk also and the the odometer disapeared and stayed like that even after the car was turned off and the speedo and tachco did not go down straight away but was down a cupple of hours later when i came back to the car but the hicas came back on when i started the car but it went away after being left for the night and drove it for a hour and nothing came up today .

Id say its your coils, if your coils are screwing up or you get dodgy ones installed; all those lights will be thrown up (at least in my experience). I Bought some DIS ignition coils for my 34 when my old ones died, turns out i got a dodgy batch and all those lights were thrown up lol. Once i put the new replacement ones in the lights went out, the car also ran a lot smoother when shifting. If after trying satanics suggestion the problem isnt fixed my money would be on the coils. Get splitfire or DIS, Splitfire have a better name but DIS are cheaper and i cant really tell the difference between my coils and the splitfires in a mates 34.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...