Jump to content
SAU Community

Recommended Posts

most of you may know but i came across this just posting it for those who have not seen this yet as i just saw it looks friken crazy i so cant wait to watch this long awaited for Vin and Paul to be playing their parts together again tell me what you think.

Link to comment
https://www.sau.com.au/forums/topic/238413-fast-and-furious-4/
Share on other sites

The fast and the furious

http://www.youtube.com/watch?v=FVbb9SfDs28

2 Fast 2 Furious

http://www.youtube.com/watch?v=RQ78fg2ZM6k...feature=related

The fast and the furious; Tokyo drift

http://www.youtube.com/watch?v=6ecU18SP4pw...feature=related

Fast and Furious

i just went through my time to watch all of them hehe, i guess the last one is focusing on showing the original actors from the first movie. and you know its quite exciting knowing that they are all back, and you just end up being very curious about the movie.

other 2 trailers are like showing more car scenes which also makes it exciting and curious to watch when it comes out.

so yeah



  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...