Jump to content
SAU Community

Recommended Posts

Ok, posting this on behalf of a friend. This car is located in Japan and would need to be imported as a race car (recommended) or to be complied under the RAWS scheme. As it's a very late model R32 I doubt you will want to wait another 5 years to bring it under the changing 15 year rule.

Extremely modified, has run a best of 10.3 on Japan's crappy drag strips. Will easily break into the 9's with a sequential box, on slicks, or on a decent track.

Some of the mods:

Trust 87mm pistons

Trust H beam rods

R34 N1 crankshaft

Nismo bearings

R34 N1 oilpump

Tomei high lift 280 degree cams in and exh

Apexi V-Max valve springs

Tomei lifters

Tomei metal head gasket

Ported and polished head

Trust plenum

Sard 1000cc Injectors

Sard fuel regulator

Twin fuel pumps

HKS T51R SPL BB turbo kit

HKS GT-II wastegate

HKS twin power ignition

HKS F-Con V Pro

HKS EVC Pro (new type)

Trust 3 layer intercooler

Trust oil cooler

Trust alloy radiator

Full titanium exhaust

OS Giken triple plate clutch

Trust 6 speed gearbox

And a whole lot more...

Some pics

GTR32%201.jpg

GTR32%202.jpg

GTR32%203.jpg

GTR32%204.jpg

Serious inquiries only, please email me

here for more details. Price is over $45k excluding shipping and compliance, so please don't email me offering $2. As I said I'm doing this on behalf of a friend as well.

Link to comment
https://www.sau.com.au/forums/topic/23877-r32-race-car/
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

Read this before you send a scent,

Rally Use/ Closed Circuit Racing

Before approving an application, the Administrator needs to be satisfied that the vehicle will be only used for rally/race purposes

Import applications for rally/race use will only be considered where the vehicle will be used in serious competition, generally at professional level. Where a particular vehicle model is readily available in the Australian market, an import approval will not be granted unless there are compelling reasons to justify why it is necessary to import a vehicle to compete in events in Australia. The fact that a vehicle may be on an eligibility list for an event is not, of itself, a reason to justify the granting of an import approval.

At a minimum, the following criteria must be met:

Eligible vehicles for rally/race use are those homologated by the Federation Internationale de l’Automobile (FIA). These vehicle models can be found listed at www.fia.com/homologations/Voit_Pays.html.

Under normal circumstances applicants will be restricted to importing a single vehicle and acceptable reasons will need to be provided to import another vehicle for rally/race use.

Road vehicles for rally use are imported on the condition that they will only be used in the course of competition, practice associated with competition and transport to and from a rally location.

The applicant must lodge with their application a statement that the vehicle will only be used for rally purposes together with a copy of a current CAMS R3 or higher grade licence. For closed circuit racing the applicant must lodge with their application a statement that the vehicle will only be used for closed circuit racing purposes together with a copy of a current CAMS C3 or higher grade licence.

In addition, the applicant will need to provide evidence of a professional or high level involvement in rally/race sport, including:

details of events in which the applicant has driven a rally/race car;

details of specific events in which the applicant proposes to compete in the car for which the import application is submitted;

details of the rally/race club or organisation of which the applicant is a member and the length of membership; and

if the vehicle is a model available in the Australian vehicle market, justification of the need to import the vehicle (cost of the vehicle in the domestic market will not generally be considered an acceptable justification).

Documents required to be submitted with the application form:

$50.00 application fee, purchase documents, certified picture ID if first time applicant, copy of CAMS R3 or higher licence or CAMS C3 or higher, evidence of participation in rallying or closed circuit racing and evidence of vehicles homologation. (If you have not imported in last 12 months you are required to provide certified ID)

Link to comment
https://www.sau.com.au/forums/topic/23877-r32-race-car/#findComment-573877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...