Jump to content
SAU Community

Recommended Posts

All I know about the engine conversion is that it was done a long time ago and I believe it was by hyperdrive? Dont quote me on that though not 100%.

I was there when my friend bought it and the owner at the time said the previous owner (old guy, like 40's) did the conversion.

Yeah the heater hoses just needed to be connected up - glad some one finally got around to doing that!!

As for the idle....my friend never looked in to that. He didnt really change the car much except for removing some stickers. So glad its finally gone to a good home - I felt sorry for the poor thing when that asian dude drove off with it =/

Ryan

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Ok the dam heater went today. I was hoping it would be ok but it seems there was a reason it was disconnected in the first place lol. Gonna go and pick up a new heater core tomorrow from KYP. Be a bitch to put in tho. Anyone got any experience with this?

Yeah ive done it before with one of mine. Means u have to take the entire dash surround out which is a prick of a job, then getting the heater unit itself out isnt all that fun either.

Actually replacing the core itself is easy enough though :P Nothing that you can do wrong really its all very straight forward.

Its orright.

Ide check with this guy first: http://www.skylinesaustralia.com/forums/R3...Sh-t238834.html

Looks like hes wrecking so im sure he will have one.

PS make sure you leak test the new one before you put it in :P that would suck otherwise

hahah. no shit. Imagine having to remove the dash twice lol. I went and got it from KYP cos it was easy and i don't mind paying 80 bucks if it give me heat in the winter :) How much time did you put aside to fit the thing? I am trying to work out when i have time to do it.

Not really sure aye, the car was stashed at my girlfriends house and I just worked on it whenever I was staying there.

Probly all and all ide budget for about half a day of work going at a normal rate. Could manage < 2 hours if you were hammering it.

Ok so i have my dash all in peices. Hope i can remember where everything goes!!! I was wondering if I can remove the heater unit without removing the box circled in red. I cant really see it happening cos i have looked at it from all angles and it is a very snug fit with the aircon unit still in there.

PA070510.jpg

It is connected to this on the other side of the firewall.

PA070508.jpg

This is the airconditioning i think so i thought i had better ask before i go unbolting things :O Better safe than sorry. So my question is it necessary to remove the aircon unit and if so what can i expect when i unbolt those metal lines.

Cheers,

Will

Thought i would post a pic of the whole thing :O Cant believe how messy it all is under there!

PA070509.jpg

Took about an hour and a half to get it all off so if anyone is thinking about replacing their heater then it is definitely doable.

When I was doing mine I didnt have to remove the AC unit. Its a bit of a pain but yeah - do able :D

EDIT: If you unbolt the metal lines then the pressurized gas in the AC system will come out. Not reccomended

Edited by rinmak

Finally finished the job. I had to take the support bar off to get the heater out. A bit of brute force also helped :P If anyone needs help doing this themselves then I am now an expert lol. Next Step is getting the suspension tested. Might change the suspension anyway because the car is too low and the wheels scrape the side panels at full lock. Anyone recommend some good Street suspension? I would be looking for it second hand as well because i need to save money for the idle problem. I got new tires for the rear wheels aswell. Grand total is now $6,330 :D

Ok another question for you guys. Because the car came with no heater i had to go and get the heater hoses from KYP. A picture is shown below. My question is what do i do with that valve on there? Presumably it should connect to a solenoid of some sort to control fluid flow? Previously i had just set the valve to full open but then the air seemed to be hot all the time.

PA100512.jpg

Questions needing answers :(

1. What to do with that valve above?

2. A good street/race suspension (second hand budget $800).

Thanks in advance

Will

Hey Will, finally got around to checking out your thread. This car looks awesome. Great buy. I'm really keen to see it in the flesh. You must be over the moon!!!

I still have my R34 stockies which will get you over the pits. They have near new tyres, so you're more than welcome to borrow them while you source new rims. I'll explain offsets to you and what you need when I see you tomorrow. Its pretty easy.

Suspension wise. See if you can find some second hand Tein Super Streets. $800 might be able to get there.

Ok another question for you guys. Because the car came with no heater i had to go and get the heater hoses from KYP. A picture is shown below. My question is what do i do with that valve on there? Presumably it should connect to a solenoid of some sort to control fluid flow? Previously i had just set the valve to full open but then the air seemed to be hot all the time.

From memory there is a cable coming out of the firewall that actuates on to that valve.

Your cooling system (based on the rust on the top of the radiator) is looking shockingly corroded.

If it was my car, I'd get the entire thing flushed and pressure tested before I moved forward.

That car was a steal, but It'd drive me nuts finding what parts are missing and trying to find them and fix them etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...