Jump to content
SAU Community

Well Defected Again, Dosnt Look Good This Time..

Fugi

By Fugi,
in General Maintenance

 Share

Recommended Posts

Fugi Community Regular

Fugi

Posted
Posted

Well as much as i love my car iv apparently done something wrong to the cops, defecting me for the second time in less then 2 years.. Pay rego for it to sit in the garage collecting dust..

Well here is the sitcho. Well i got defected where else but chapel st, but befor you say u stupid c*** asif do chapel laps.. i wasnt, i live near there and i was goin to rebel sport at like 3pm during day.

ok so here is the damage:

Parcel shelf - inspect for structural integrity(previous owner cut holes for 6x9's)

Bumper Bar - inspect for structural integrity

Pod or intercooler, not both.

Windscreen - to be inspected

Tyre placard - to be fitted

So i got my stock airbox and windscreen has nothing wrong with it, think he just felt like writing more that day. But the big problem im having is "Inspect for structural integrity" went to the mechanics today and the guy said i have to get engineers to have a look at it :P... well just wanted to know if this is correct and if it is dose anyone know were and how much this is going to cost me???

Thanks for reading

R33_Dude Rising Star

R33_Dude

Posted
Posted

I had to get checked for structural integrity when my car was being repaired.

Its not a big deal really, cost me $100 and an hour of my time. Brought the car to the engineer along with photos of the repair project, he looked at the chassis and a few other things and signed a piece of paper.

R33_Dude Rising Star

R33_Dude

Posted
Posted
did you repair it your self?? or did you have the engineer repair it??

Repaired by my old man and uncle and then taken to the engineer for approval. Actual cost was $138.40. Took four hours from an accredited workshop. No big deal really.

UWISSH! Grand Master

UWISSH!

Posted
Posted

dude being defected for the second time in less than 2 years is not alot, i would call that being pretty lucky.

try being defected 2 times in 3 weeks!!!!

and as for what u wer defected for, they are no major problems, wen u start getting sent for epa emmisions tests then u know u got a problem

joel234 Rookie

joel234

Posted
Posted

lol my old datto got 13 defects and i didnt even let them get under the bonnet to see the 230hp z18et in there lol

:D

list goes :

exaust

too low

no interior

aftermarket gauges

battery not secured (in boot)

no spare tyre

front mount

no parkers

only one seat (drivers)

to loud

bald tyres

non standard wheels

hole in trans tunnel ... had rb20 gearbox so had to cut shifter hole

full roll cage

locked diff

some people get all the luck lol

Fugi Community Regular

Fugi

Posted
  • Author
Posted
dude being defected for the second time in less than 2 years is not alot, i would call that being pretty lucky.

try being defected 2 times in 3 weeks!!!!

and as for what u wer defected for, they are no major problems, wen u start getting sent for epa emmisions tests then u know u got a problem

damm 2 times in 3 weeks yea i would be priddy pissed if that happend.. Its just that after spending all this money keeping the car on the road never have anything for mods..

thanks for making me feel abit better though :D lol

blind_elk Grand Master

blind_elk

Posted
Posted
ahh thanks heaps for that, called daniel up and booked it in for Tuesday for him to take a look. Hopefully he can do something about it and dosnt cost me an arm or a leg.

Thanks again

So how did it go? Or aren't you talking to me LOL ?
  • 1 month later...
Fugi Community Regular

Fugi

Posted
  • Author
Posted (edited)
So how did it go? Or aren't you talking to me LOL ?

sorry mate, well not much has happened atm, tried to get it towed there but racv wouldn't let me.. So me and daniel agreed on me sending him some pics of the parcel shelf.. He even offered to drive down to my house to have a look.. ***top bloke** But i have been really busy atm so havent got around to it..

Lost my license till December 22nd so its not a top priorety atm.. but hoping to sort it out next week..

post-24404-1227538274_thumb.jpgpost-24404-1227538322_thumb.jpg

post-24404-1227538335_thumb.jpgpost-24404-1227538347_thumb.jpg

post-24404-1227538362_thumb.jpg

thought i might chuck up the pics, just so people can see what happens when you get your speakers installed by autobahn.. lol :P

thankyou for everyone that helped

will hopefully be able to post up "cars back on the road" in a couple of weeks :)

Edited by Fugi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • Jarsky
      After market rear camber arm adjustment

      By Jarsky · Posted

      This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...