Jump to content
SAU Community

Recommended Posts

just looked at that graph.. i paid for my car on july 20th which was the right time.. its a pity it didnt ship till the 30th of september (when the aussie dollar was much lower)

Yeah the dollars going to hurt everyone for a while, but it will even it self out.

I remember years ago when I first went to Japan I was getting NZ 0.45 to the 100 Yen, that was hard work.

We are still carrying alot of stock that we brought when the dollar was high and they are selling very quickly now, as people know there cheap given the current exchange rate.

See what happens over the next 2 months but I tend to think it will struggle to get back over .80 AUD / 100 Yen

Oz

Edited by OzCarImports

Aussie Dollar May Drop 25% on Commodities, CBA Says (Update1)

By Lukanyo Mnyanda and Candice Zachariahs

Oct. 23 (Bloomberg) -- The Australian dollar, headed for the worst year since a currency peg ended in 1983, may drop a further 25 percent through March as a slowing global economy saps demand for the country's raw materials, according to CBA Europe Ltd.

The currency, which slid 17 percent in the third quarter, may trade as low as 50.45 U.S. cents, the weakest since Dec. 21, 2001, according to Divyang Shah, chief strategist in London at CBA Europe, a unit of Commonwealth Bank of Australia. The currency, which was at 66.85 U.S. cents at 11:19 a.m. in Sydney, has tumbled with equity markets as investors dump high-yielding assets for safer holdings in the U.S. dollar and Japan's yen.

``Given the deteriorating outlook for commodities, the Aussie is going to remain under pressure,'' Shah said in a telephone interview yesterday. ``Extreme risk aversion is another factor that has weighed on the Aussie.'' Commonwealth Bank is Australia's largest provider of mortgages.

Australia's dollar, also known as the Aussie, slumped in the three months through Sept. 30 as the Reuters/Jefferies CRB Index, which tracks commodities futures, dropped more than a quarter. The Baltic Dry Index, a measure of shipping costs for commodities, plummeted more than 66 percent. The country relies on shipments abroad of materials including iron ore, crude oil and coal for about 17 percent of its economy.

Risk Appetite

The VIX volatility index, a gauge reflecting expectations for stock-market price changes and risk aversion, rose to a record 70.33 on Oct. 17. The S&P 500 has extended its 2008 retreat to 39 percent, poised for the worst yearly performance since 1931.

High-yielding currencies including the Aussie, the South African rand and the Brazilian real have also dropped as concern the world economy is headed for recession makes so-called carry trades unattractive.

Investors in such trades borrow in countries like Japan and the U.S. where interest rates are at 0.5 percent and 1.5 percent to invest in higher-yielding assets. The benchmark rate is 6 percent in Australia, 12 percent in South Africa and 13.75 in Brazil. The risk is exchange-rate fluctuations can erode profits.

The Australian dollar has declined 24 percent versus the dollar in 2008, the fifth-worst performance of major currencies after the rand, Norway's krone, the South Korean won and real. The currency, which reached a 25-year high in July, hasn't lost more than a fifth of its value in a year since it was allowed to trade freely in December 1983, according to data compiled by Bloomberg.

Forecasts Slashed

Shah expects the Australian dollar will be worth 59 U.S. cents at the end of the first quarter of 2009. The Commonwealth Bank of Australia, which revised its forecast for the Aussie on Oct. 17, expects the currency to recover to 64 U.S. cents by June 30 and then to 75 cents by the end of 2009.

Australia and New Zealand Banking Group Ltd. said Oct. 21, it expects the Aussie to drop in each of the coming quarters and reach lows of 60 U.S. cents and 66 yen by the end of 2009.

``We are now forecasting below trend growth through to 2010,'' wrote Tony Morriss, a senior currency strategist at ANZ in Sydney. ``We now expect the Reserve Bank of Australia to cut rates further over coming months -- towards a cash rate of 4.5 percent.''

Craig Ferguson, currency hedge fund manager at Antipodean Capital Management in Melbourne, yesterday said the Australian dollar may drop to 55 U.S. cents.

Interest-Rate Cuts

The Reserve Bank of Australia is expected to cut its benchmark lending rate by 0.5 percentage point to 5.5 percent on Nov. 4, according to a Bloomberg survey of 16 economists. The rate stood at a 12-year high of 7.25 percent in August.

Traders expect the central bank to lower borrowing costs by 168 basis points over the next 12 months according to a Credit Suisse index based on overnight swaps trading.

The Aussie, together with the rand and the Mexican peso, was one of the currencies described this week by Goldman Sachs Group Inc. as undervalued by more than 20 percent based on inflation, productivity and terms of trade.

To contact the reporter on this story: Lukanyo Mnyanda in London at [email protected]

Last Updated: October 22, 2008 21:12 EDT

Australia and New Zealand Banking Group Ltd. said Oct. 21, it expects the Aussie to drop in each of the coming quarters and reach lows of 60 U.S. cents and 66 yen by the end of 2009.

Ahh somebody tell A & NZ banking that we're basically already getting those exchange rates (the USD has a bit more to lose to get there).

per 1 AUD: 64.67 YEN and 0.66 USD

(According to google exchange rate function)

Ahh somebody tell A & NZ banking that we're basically already getting those exchange rates (the USD has a bit more to lose to get there).

per 1 AUD: 64.67 YEN and 0.66 USD

(According to google exchange rate function)

thats how insane things are at the moment , what should have taken 6 months has happened in a week

57y for a dollar just now

thats how insane things are at the moment , what should have taken 6 months has happened in a week

57y for a dollar just now

fark!

that means that my JDM parts costs just doubled!

alistair,

flick me a PM when you get a sec RE today.

Unreal.

How low can it go, I might start buying with Zimbawe Dollars!!

I have brought 3 cars this week, thought they were cheap, mmmm well they were!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...