Jump to content
SAU Community

Scratches On Car From Car Wash

SL33K

By SL33K,
in Exterior & Interior Styling

 Share

Recommended Posts

SL33K Experienced

SL33K

Posted
Posted

I took my R33 for a wash today and after the was it had so many hairline scratches on it. And i am very Pissed off.

You cant see them easily but they are there and they were not before.

I tried scratch X and it sux. the scratches are so thin and still it couldnt get them off.

I read somewhere i can use Turtle Wax Rubbing Compound, anyone tried it?

or any other ideas.

Please help. I feel shitty.

Link to comment
https://www.sau.com.au/forums/topic/239569-scratches-on-car-from-car-wash/
Share on other sites
JamesK Experienced

JamesK

Posted
Posted

You mind telling us what the car wash was so we don't make the same mistake? How big a spread are we talking about here like the entire car or like just the bonnet or trunk or something? I would recommend some sort of polish but for the life of me I cant remember what brand, you go to autobarn and they'll tell you if they are really shallow it shouldn't be to hard to get out, I feel for you dude hopefully the solution will be as quick and painless as possible

Trav33 Mentor

Trav33

Posted
Posted

If you go to your local autoparts store, you'll see a wide range of polishing products.

I generally stick to the Meguiars stuff.

They have products which vary in how agressive they are, from diamond cut, thru to medium cut, light cut and swirl removers. I'd start down at the low end, maybe a light cut and see how you go with that.

JamesK Experienced

JamesK

Posted
Posted

Travs right, also usually if you go to a have decent autostore (well the ones I usually go to anyway) and you bring your car usually they will do a small trail on your car to see which grade is best for you

4door_Sleeper Veteran

4door_Sleeper

Posted
Posted

I never use commercial carwashes for the skyline.

Years ago when I worked part time at a servo, the local kids would sneek in and tie sparkplugs to the rotating brushes (you can imagine the damage that caused)

You may need to use a machine rather than hand polish to buff out the marks, then finish witht he finer stuff by hand. Either way its lots of work.

SL33K Experienced

SL33K

Posted
  • Author
Posted
You mind telling us what the car wash was so we don't make the same mistake? How big a spread are we talking about here like the entire car or like just the bonnet or trunk or something? I would recommend some sort of polish but for the life of me I cant remember what brand, you go to autobarn and they'll tell you if they are really shallow it shouldn't be to hard to get out, I feel for you dude hopefully the solution will be as quick and painless as possible

It was the one on albany Highway in cannington, Perth. the one next to Bankwest.

The scratches are all over. On the bonnet, trunk. side. I used to wash my car myself and my car dint have any scratches and yesterday i decided to go to the car wash coz i was lazy.

Thanx for the help guyz. Might got to autobarn and will also check out an autostore.

So what you guyz are sayin is that the scratches can come off for sure? I dont need to repaint or anythin?

they are very tiny scrathes but a lot. you cant see them at times but if you look properly they are there.

Hope they go away. :P

n/aTurbo Community Regular

n/aTurbo

Posted
Posted

Yeah all carwashes are like that. If you gonna go to one only thing i would do (and i do, do this) is just rinse it with the high pressure soap gun and just spot free rinse it with the gun aswell. Never use the brush in my opinion.

Anywayz bad luck on the trouble Vish and yeah i would follow MintR33's advice and take it to a detialer. Cost you some money but u got pros working on your car, plus you dont have to break your own back aswell.

Fry_33 Proficient

Fry_33

Posted
Posted (edited)
I tried scratch X and it sux. the scratches are so thin and still it couldnt get them off.

I just wondered what your technique was when you used the ScratchX. I only ask because if you didn't use it as they intended then you will not get the results they market. I'm definitely not calling you stupid so don't take offence.

I have seen a video of the Meguiar's guys using this and they mentioned that it can give very similar results to using buffing machines, it just takes longer and obviously takes a lot more effort. This doesn depend on how dep the scratches are though. After the paint was clean they worked on a small 30x30cm square and you apply some scratchX to the foam pad and spread it around. Then start to work the product in an up and down motion and then side to side. Keep moving the product from the edges back into the area you're working on. The product has diminishing abrasives in it so the more you work it the finer the particles get.

If you reall want to tell if it is doing something then use some painters tape and put a line of it on the paint and then remove once done and you'll see if you've made an improvement. If you try to large an area you may not achieve much at all. If you do see an improvement but don't get it to exactly how you want try another application on the same area. There is no advantage in letting the ScratchX dry on the paint before you remove it.

Use a clean microfiber towel to remove the product or you might just be adding scratches back into the paint. You'll need to wax the paint after using polishes.

I just thought I'd mention this as it MAY help and if you've already got the ScratchX it doesn't cost you anything.

Edited by Fry_33
SL33K Experienced

SL33K

Posted
  • Author
Posted
I just wondered what your technique was when you used the ScratchX. I only ask because if you didn't use it as they intended then you will not get the results they market. I'm definitely not calling you stupid so don't take offence.

I have seen a video of the Meguiar's guys using this and they mentioned that it can give very similar results to using buffing machines, it just takes longer and obviously takes a lot more effort. This doesn depend on how dep the scratches are though. After the paint was clean they worked on a small 30x30cm square and you apply some scratchX to the foam pad and spread it around. Then start to work the product in an up and down motion and then side to side. Keep moving the product from the edges back into the area you're working on. The product has diminishing abrasives in it so the more you work it the finer the particles get.

If you reall want to tell if it is doing something then use some painters tape and put a line of it on the paint and then remove once done and you'll see if you've made an improvement. If you try to large an area you may not achieve much at all. If you do see an improvement but don't get it to exactly how you want try another application on the same area. There is no advantage in letting the ScratchX dry on the paint before you remove it.

Use a clean microfiber towel to remove the product or you might just be adding scratches back into the paint. You'll need to wax the paint after using polishes.

I just thought I'd mention this as it MAY help and if you've already got the ScratchX it doesn't cost you anything.

Thanx mate. i dint try it that way. will try it when i go home(still at uni).

Bliksem Veteran

Bliksem

Posted
Posted
how the hell do the paint detailers get the paint so nice and shiny and rid the paint of the scratches????

Usually by machine polishing. Most of the time the scratches usually only affect the clear coat. If they're deep enough to be felt with a fingernail then that could be a problem

Entice Contributor

Entice

Posted
Posted

wow very shiny, amazing. i've only just started taking my 32 through a car wash, usually do it by hand the old fashioned way. we have a "laser car wash" tho, it doesn't touch your car. just sprays soap on, lets it soak, washes it off with high power hoses then repeats with a few different soaps. even washes under your car :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...