Jump to content
SAU Community

Recommended Posts

was pulling out from the bank today and all of the sudden my battery light comes on on the dash, alternator commences screaming its head off. my stereo and electrics all flicker and turn off/or operate faster than usual...

drove straight home and flicked her off, turned it on again to see if it was still there and it was. give it a rev and the scream returns, windows go superfast...tho when a device such as the windows are used, the battery light goes off, i guess because its using charge...tends to suggest the alternator might be overcharging...

for instance, my windows go up and down superfast now...havnt been game to try anything else out in fear of burning it out...but wth? makes sense that the screaming coming from the alternator tricks the battery light on, but why? whats happend? would my alternator be on the way out? is it overcharging/overtentioned pulley? and what should i do next? :S

cheers...

Link to comment
https://www.sau.com.au/forums/topic/239654-battery-light-alternator-scream/
Share on other sites

living in a country town is gonna be hard to find one for a jap import...unless they are a universal fit? what else would suit a RB25? im thinking one from a R31/VL (RB30)?

Edited by G0DZLR

I'd check the amp rating on them. The RB30 one's are rated to less, but should fit.

They are a mitsubushi alternator so I'd look around at some mitsu's to see what they use, if they are the same mounts etc.

UPDATE: limped the car to an auto electrician today, have been quoted $340! to repair the alternator....this doesnt sound normal to me at all...considering i couldv picked up a replacement for $50-$100 on here...is this way overpriced?

UPDATE: limped the car to an auto electrician today, have been quoted $340! to repair the alternator....this doesnt sound normal to me at all...considering i couldv picked up a replacement for $50-$100 on here...is this way overpriced?

What did he say the problem was? 100% sure its an alternator, I would suggest taking it out getting the part number and seeing if the two you are contemplating to replace it with are interchangeable ether that or you could post it here and hope someone can FAST it for you which might work

An R33 alternator is a direct bolt-on onto a r32 rb20 engine (apart from the battery bolt terminal but thats easily replaced by auto-electrician)

If a VL alternator is the same as a r32 alternator, then it should fit your r33..

Bosch Australia charges about $250~ for a brand new R31 alternator, so a price of $340 for a rebuild is a rip off. If you pull out the alternator for him, it should only cost about $150-$200 to rebuild

  • 2 weeks later...

Mate my alternator was making a rattling noise (sounded like a bearing) and i replaced it. All good now, cost me $120 for a R33 one from a wrecker with 30day warranty, no dramas as of yet. You do find the odd R33 alternator on ebay, i saw one go for $90.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...