Jump to content
SAU Community

Fs: Skyline R32 Gts-t, Very Nicely Modded, Cheap!

ONETEN

By ONETEN,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

ONETEN Enthusiast

ONETEN

Posted
Posted (edited)

Make: Nissan

Model: Skyline R32 GTS-t 1989

Milage: 125 XXX

Transmission: 5 Speed Manual

Colour: White

Location: Northern Beaches, Sydney, NSW

Complied? Yep

RWC supplied? Yep

Currently registered? Not currently, will be registered in the next few days.

Price: $10,000

Contact: Here, or on 

Hey Guys,

After accepting a job in Perth, I am now facing a HUGE lifestyle change, and have decided to sell up all my performance cars. So this is the sale of my beloved R32 Skyline with RB25DET powerplant. Well my skyline has been in long term storage, since late 2005 when the rb20 died. I privatly imported this car from Japan in 2004 for a close friend of mine, who drove the car for about 7 months in 2005 before the old rb20 blew a HG. After this happened we put the car into storage for an rb25 conversion, which we did, and then my friend lost interest in it, and i ended up buying the car from him. A further 8 months or so went by before i got around to re-installing the RB25 gearbox and finishing the conversion. Since then the car has continued in storage as i just havent had the funds nor time to re-register it. Now i am faced with moving to Perth, so i was gonna take her over, but have decided to sell up everything and move on. This car is currently not registered, but before my decision to move came about i was ppreparing it for rego, which meant installing a whole host of brand new parts (like new as in NEVER driven with). The car will be fully registered before ANY sale which happen early next week, as soon as i have time.

This is a 1989 R32 GTS-t TYPE M so has big brakes, factory sunroof and the other type m goodies. It has had a Series II RB25DET engine & gearbox conversion performed on it. The engine had 65000kms on it at time of install, and has not seen 2000kms since. It is also equipped with the Nylon-compressor wheel turbo, and is very very very responsive. Engine is in top condition, and has not been boosted above stock boost pressure.

Engine Mods:

- 1996 Series II RB25DET Engine & Gearbox Conversion, all professionally wired & everything on dash etc is interfaced

- Brand New GReddy Type M Intercooler kit with 600x300x70mm bar & plate core (bought from slide)

- Brand new 52mm thick custom alloy radiator with silicon hoses

- Brand new 3 inch stainless steel exhaust from cat back, very high quality & super quiet

- 3 inch mild steel dump pipe to cat

- 3 inch Stainless High flow x-force cat

- Some Japanese Brake Master Cylinder Stopper

- Bosch 044 Intank Fuel Pump

- Brand new Apexi Super Flow Air Filter

Suspension & Driveline:

- Bilstein adjustable coilovers all round, very stiff 9kg front and 7kg rear

- Custom 1 peice tailshaft, with XR8 uni joints to suit the rb25 gearbox

- Brand new exedy super heavy duty clutch

Body & Exterior(Besides facotry body kit):

- GTR Style front bar made for GTS-t

- Original Japanese rego sticker :):D

- R33 Stocko's in VGC

Interior:

- OEL Pillar Mounted Boost Gauge

- Pioneer Head unit

- 6 inch's in the rear parcel shelf, and pioneer 5x8's in the doors, sounds great!

- Nice Japanese brand steering wheel (caruso??)

- Standard interior in Great Condition!

- All Electrics work! no hack jobs here ;)

- A/C Hooked up to RB25, but needs a regas to work

Other:

- Car is FULLY engineered & Complied, and i have ALL paperwork & most receipts totalling in excess of $20,000

- Just had a service, fresh plugs and fresh Penrite Semi Synthetic oil

She starts & runs beautifully, and is a pleasure to drive. The Bilstein's offer a really firm ride, awesome for a bit of spirited driving.

Now, here are some not so great points about the car, bear in mind that these points & the fact i need to sell ASAP due to relocation the price is set accordingly. I am losing a stupid amount of money on this car, what i am selling it for is less than what the original imporation costs were. Points are:

- Old repair from Japan has stared to swell out of the LHS rear wheel arch, thought to be rust at first but has turned out to be an old fibreglass repair

- A few minor paint belmishes here and there, nothing out of the ordinary for 19 year old paint.

- Clutch throwout bearing has become a tad noisy (still opearates fine, prob just a bit tight from sitting for so long)

Price is $10,000 fully regoed

Contact: Here, or on 

Im sure there are a few things i have forgotten and I will update with any forgotten info when i remember it, or just ask whatever you would like to know.

Pics of car:

http://img.photobucket.com/albums/v608/hcope86/r32_front1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_front3.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_front2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_back1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_back2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_engine1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_engine2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior3.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_dash.jpg

Cheers,

Hayden

Edited by Duncan
remove contact details at OP request
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...