Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: Skyline R32 GTS-t 1989

Milage: 125 XXX

Transmission: 5 Speed Manual

Colour: White

Location: Northern Beaches, Sydney, NSW

Complied? Yep

RWC supplied? Yep

Currently registered? Not currently, will be registered in the next few days.

Price: $10,000

Contact: Here, or on 

Hey Guys,

After accepting a job in Perth, I am now facing a HUGE lifestyle change, and have decided to sell up all my performance cars. So this is the sale of my beloved R32 Skyline with RB25DET powerplant. Well my skyline has been in long term storage, since late 2005 when the rb20 died. I privatly imported this car from Japan in 2004 for a close friend of mine, who drove the car for about 7 months in 2005 before the old rb20 blew a HG. After this happened we put the car into storage for an rb25 conversion, which we did, and then my friend lost interest in it, and i ended up buying the car from him. A further 8 months or so went by before i got around to re-installing the RB25 gearbox and finishing the conversion. Since then the car has continued in storage as i just havent had the funds nor time to re-register it. Now i am faced with moving to Perth, so i was gonna take her over, but have decided to sell up everything and move on. This car is currently not registered, but before my decision to move came about i was ppreparing it for rego, which meant installing a whole host of brand new parts (like new as in NEVER driven with). The car will be fully registered before ANY sale which happen early next week, as soon as i have time.

This is a 1989 R32 GTS-t TYPE M so has big brakes, factory sunroof and the other type m goodies. It has had a Series II RB25DET engine & gearbox conversion performed on it. The engine had 65000kms on it at time of install, and has not seen 2000kms since. It is also equipped with the Nylon-compressor wheel turbo, and is very very very responsive. Engine is in top condition, and has not been boosted above stock boost pressure.

Engine Mods:

- 1996 Series II RB25DET Engine & Gearbox Conversion, all professionally wired & everything on dash etc is interfaced

- Brand New GReddy Type M Intercooler kit with 600x300x70mm bar & plate core (bought from slide)

- Brand new 52mm thick custom alloy radiator with silicon hoses

- Brand new 3 inch stainless steel exhaust from cat back, very high quality & super quiet

- 3 inch mild steel dump pipe to cat

- 3 inch Stainless High flow x-force cat

- Some Japanese Brake Master Cylinder Stopper

- Bosch 044 Intank Fuel Pump

- Brand new Apexi Super Flow Air Filter

Suspension & Driveline:

- Bilstein adjustable coilovers all round, very stiff 9kg front and 7kg rear

- Custom 1 peice tailshaft, with XR8 uni joints to suit the rb25 gearbox

- Brand new exedy super heavy duty clutch

Body & Exterior(Besides facotry body kit):

- GTR Style front bar made for GTS-t

- Original Japanese rego sticker :):D

- R33 Stocko's in VGC

Interior:

- OEL Pillar Mounted Boost Gauge

- Pioneer Head unit

- 6 inch's in the rear parcel shelf, and pioneer 5x8's in the doors, sounds great!

- Nice Japanese brand steering wheel (caruso??)

- Standard interior in Great Condition!

- All Electrics work! no hack jobs here ;)

- A/C Hooked up to RB25, but needs a regas to work

Other:

- Car is FULLY engineered & Complied, and i have ALL paperwork & most receipts totalling in excess of $20,000

- Just had a service, fresh plugs and fresh Penrite Semi Synthetic oil

She starts & runs beautifully, and is a pleasure to drive. The Bilstein's offer a really firm ride, awesome for a bit of spirited driving.

Now, here are some not so great points about the car, bear in mind that these points & the fact i need to sell ASAP due to relocation the price is set accordingly. I am losing a stupid amount of money on this car, what i am selling it for is less than what the original imporation costs were. Points are:

- Old repair from Japan has stared to swell out of the LHS rear wheel arch, thought to be rust at first but has turned out to be an old fibreglass repair

- A few minor paint belmishes here and there, nothing out of the ordinary for 19 year old paint.

- Clutch throwout bearing has become a tad noisy (still opearates fine, prob just a bit tight from sitting for so long)

Price is $10,000 fully regoed

Contact: Here, or on 

Im sure there are a few things i have forgotten and I will update with any forgotten info when i remember it, or just ask whatever you would like to know.

Pics of car:

http://img.photobucket.com/albums/v608/hcope86/r32_front1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_front3.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_front2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_back1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_back2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_engine1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_engine2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior3.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_dash.jpg

Cheers,

Hayden

Edited by Duncan
remove contact details at OP request
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...