Jump to content
SAU Community

Fs: Skyline R32 Gts-t, Very Nicely Modded, Cheap!

ONETEN

By ONETEN,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

ONETEN Enthusiast

ONETEN

Posted
Posted (edited)

Make: Nissan

Model: Skyline R32 GTS-t 1989

Milage: 125 XXX

Transmission: 5 Speed Manual

Colour: White

Location: Northern Beaches, Sydney, NSW

Complied? Yep

RWC supplied? Yep

Currently registered? Not currently, will be registered in the next few days.

Price: $10,000

Contact: Here, or on 

Hey Guys,

After accepting a job in Perth, I am now facing a HUGE lifestyle change, and have decided to sell up all my performance cars. So this is the sale of my beloved R32 Skyline with RB25DET powerplant. Well my skyline has been in long term storage, since late 2005 when the rb20 died. I privatly imported this car from Japan in 2004 for a close friend of mine, who drove the car for about 7 months in 2005 before the old rb20 blew a HG. After this happened we put the car into storage for an rb25 conversion, which we did, and then my friend lost interest in it, and i ended up buying the car from him. A further 8 months or so went by before i got around to re-installing the RB25 gearbox and finishing the conversion. Since then the car has continued in storage as i just havent had the funds nor time to re-register it. Now i am faced with moving to Perth, so i was gonna take her over, but have decided to sell up everything and move on. This car is currently not registered, but before my decision to move came about i was ppreparing it for rego, which meant installing a whole host of brand new parts (like new as in NEVER driven with). The car will be fully registered before ANY sale which happen early next week, as soon as i have time.

This is a 1989 R32 GTS-t TYPE M so has big brakes, factory sunroof and the other type m goodies. It has had a Series II RB25DET engine & gearbox conversion performed on it. The engine had 65000kms on it at time of install, and has not seen 2000kms since. It is also equipped with the Nylon-compressor wheel turbo, and is very very very responsive. Engine is in top condition, and has not been boosted above stock boost pressure.

Engine Mods:

- 1996 Series II RB25DET Engine & Gearbox Conversion, all professionally wired & everything on dash etc is interfaced

- Brand New GReddy Type M Intercooler kit with 600x300x70mm bar & plate core (bought from slide)

- Brand new 52mm thick custom alloy radiator with silicon hoses

- Brand new 3 inch stainless steel exhaust from cat back, very high quality & super quiet

- 3 inch mild steel dump pipe to cat

- 3 inch Stainless High flow x-force cat

- Some Japanese Brake Master Cylinder Stopper

- Bosch 044 Intank Fuel Pump

- Brand new Apexi Super Flow Air Filter

Suspension & Driveline:

- Bilstein adjustable coilovers all round, very stiff 9kg front and 7kg rear

- Custom 1 peice tailshaft, with XR8 uni joints to suit the rb25 gearbox

- Brand new exedy super heavy duty clutch

Body & Exterior(Besides facotry body kit):

- GTR Style front bar made for GTS-t

- Original Japanese rego sticker :):D

- R33 Stocko's in VGC

Interior:

- OEL Pillar Mounted Boost Gauge

- Pioneer Head unit

- 6 inch's in the rear parcel shelf, and pioneer 5x8's in the doors, sounds great!

- Nice Japanese brand steering wheel (caruso??)

- Standard interior in Great Condition!

- All Electrics work! no hack jobs here ;)

- A/C Hooked up to RB25, but needs a regas to work

Other:

- Car is FULLY engineered & Complied, and i have ALL paperwork & most receipts totalling in excess of $20,000

- Just had a service, fresh plugs and fresh Penrite Semi Synthetic oil

She starts & runs beautifully, and is a pleasure to drive. The Bilstein's offer a really firm ride, awesome for a bit of spirited driving.

Now, here are some not so great points about the car, bear in mind that these points & the fact i need to sell ASAP due to relocation the price is set accordingly. I am losing a stupid amount of money on this car, what i am selling it for is less than what the original imporation costs were. Points are:

- Old repair from Japan has stared to swell out of the LHS rear wheel arch, thought to be rust at first but has turned out to be an old fibreglass repair

- A few minor paint belmishes here and there, nothing out of the ordinary for 19 year old paint.

- Clutch throwout bearing has become a tad noisy (still opearates fine, prob just a bit tight from sitting for so long)

Price is $10,000 fully regoed

Contact: Here, or on 

Im sure there are a few things i have forgotten and I will update with any forgotten info when i remember it, or just ask whatever you would like to know.

Pics of car:

http://img.photobucket.com/albums/v608/hcope86/r32_front1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_front3.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_front2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_back1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_back2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_engine1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_engine2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior1.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior2.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_interior3.jpg

http://img.photobucket.com/albums/v608/hcope86/r32_dash.jpg

Cheers,

Hayden

Edited by Duncan
remove contact details at OP request
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...