Jump to content
SAU Community

Recommended Posts

They also have better breathing and you can fit things under them like the Tomei cam baffle kit etc.

MYP16, I raised the back of my bonnet 10mm which helped some, aswell as rearranging the pipework over the engine and losing the stock bov.

yeah thanks for ur help guys but yer it hits right at the front of the covers and cam gear covers meet, fouls by quite a bit so raising the bonnet wont help and i dont really wanna cut my bonnet as its a gtr bonnet , any other engine mounts that can be used?

possibly change gear box and tail shaft angle slightlly.

which could wear out tail shaft uni joints a touch quicker....

i wouldnt worry about that to much tho..

id rather have a bonnet that close's.

haha

My bonnet closes and I haven't done anything drastic like change engine mounts or space the crossmember. You just have to be smart with the piping..

That being said, my bonnet does rub on the intake manifold which will be solved when the forward facing plenum goes on, then it will only rub slightly on the timing belt cover backing plate..

I really don't see how your bonnet can't "close" then, mine hits the timing belt cover backing plate and the intake manifold but it still "closes".

Before I changed the piping setup and removed the stock bov it wouldn't "close", it barely grabbed the safety latch and sat up 4" on one side.

ok the bonnet is not on car yet as the motor is still being built but the block and head are dummy fitted in the car so i sat the cam covers on and wen ya kneel down beside the car and look across it from guard to guard they r sitting up by more than an inch

but i spoke to my fabricator last night and he is gonna lower engine mount brackets etc and make the f**kers fit

Edited by MYP16
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...