Jump to content
SAU Community

Recommended Posts

  • 5 weeks later...

breather pipe can be tough to get off, it can take a lot of force and wriggling to get it loose, keep track of all of the screws, there will be a few, i spose there isn't really a lot to it, there is a tutorial around here, im going to do mine either 2mro or during the week

will post pics if you like when i get around to doing them

Edited by RusH_
Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4263191
Share on other sites

Its a pain in the ass !!!! I did ours on Friday had to dismantle the intake and all the pipes etc in the top of the motor. Thats the most time consuming part after that its quite easy. It was a little different to the tutorial as ours is a NEO engine but it is much the same.

As has been said keep track of your screws as there will be a few and take your time.

Good luck with it

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4263403
Share on other sites

It depends on your power output. If you have a sub 200rwkw car then iridiums are good, but if you have a 200+ rwkw 'line then your better off with coppers. The iridiums have a long and trouble free life but don't provide the fattest brightest spark, so if you have knock issues with a bigger turbo etc then coppers are probably a better option. Not saying it will solve your problem, but its more likely to help than iridiums can.

Basically, iridiums are not a performance plug, they are more a maintenance free plug.

And before anyone queries, 200rwkw is just the start, I actually had no problems with my iridiums till I went from 240 to 280rwkw [different turbo install] and had to make the change to coppers.

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4264885
Share on other sites

It's best after ALL THAT WORK to use the high quality NGK Grade 8 Iridiums for your car (or equivalent)

+1

make sure you gap them right, dont drop em either haha

+1

Hmm.. didn't know that copper ones could solve knock issues.... have to look into that. I assume they're cheaper, as well.

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4269679
Share on other sites

try around $3 a plug not $20. I use coppers from the recommendations made in various threads in here not to mention CRD used a set of em when they tuned my car. I use NGK BCPR6ES gapped to .8mm but I'm going to the BKR7ES gapped to .8 as well on the next service.

My VN with a small cam, chip and exhaust has been using the same set of Iridiums for 80 000km and they are still fine, so for a near stock application they could well be perfect - the amount i've saved there not having to buy sets of 8 copper plugs more than makes up the high inital cost.

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4270222
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...