Jump to content
SAU Community

Recommended Posts

hi guys,

i had my FMIC installed on tuesday and now whenever i hit full boost (10-11psi) the turbo emmits a really high pitched whine..

obviously the problems between the rb's and the 1j's will be different but the issues would definatly be similar with regards to turbos,

any and all information is much appriciated

cheers

nerm

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/
Share on other sites

Best case scenario - you have a boost leak somewhere, check all of your silicone joiners, hose clamps and vaccum hoses on the intercooler system. Tighten them all and make sure that they are all sealing perfectly.

Worst case scenario - your turbo is on the way out. When a turbo squeals on boost it usually means that the compressor fan is damaged.

Example:

Myturbo2small.jpg

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/#findComment-4201121
Share on other sites

I had no signs.... I just took off at the lights one day and the car spooled down faster than it spooled up and from there it just had absolutely no go whatsoever.

My ceramic exhaust wheel was found shattered into about a million pieces in the cat. Turns out the other turbo wasn't too far away.

Note to self, 20 year old stocky turbos don't like lots of boost :(

But turbos dying are a double edged sword. Bad cause it's expensive but awesome because you get more power!!!

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/#findComment-4201294
Share on other sites

yeah it would be a leak as myn had the same thing after putting a boost controller on it turned out that the idiots at DTS but brass bolts on the zoorst housing to hold the turbo on i mean seriously wat idiots

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/#findComment-4207131
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...