Jump to content
SAU Community

Recommended Posts

Ok it's time for our annual SAU/UAS official dyno day. These days go off as it's the big one for SAU.

Cost will be $50 members and $55 non members.

There will be winners crowned for each category of:

Highest power N/A

Highest power RB20 Stock Turbo

Highest power RB20 Aftermarket Turbo

Highest power RB25 Stock Turbo

Highest power RB25 Aftermarket Turbo

Highest power RB26 Stock Turbo

Highest power RB26 Aftermarket Turbo

Highest power RB30

There will be small prizes this time although it's just a friendly competition and to see how your car is going.

Dyno is a Dyno Dynamics dyno. Dyno is a rear wheel drive dyno but GTR's will have their fuse pulled or drive shafts removed free of charge.

10am til 4pm or later if there are still cars to go on and if UAS agree on the day. I will be there a bit before but first car goes on at 10am. I'd suggest getting there early if you want to get away before lunch time as that will be the quietest part of the day.

I will be taking money and names on the day so that everyone goes on the dyno in order of arrival. Bring your membership cards club members. We will have membership forms available on the day for those who want to join.

Unique Autosports is located at Unit 1, 20 Tucks Road, Seven Hills. You go to the end of the M2, turn left, 1st right, 3rd left then it's down the end on the right. They have a great new dyno room installed which is nice and quiet compared to the old one and has good ventilation.

Post your interest.

Link to comment
https://www.sau.com.au/forums/topic/240555-sau-nsw-official-dyno-day/
Share on other sites

  • Replies 225
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images




  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...