Jump to content
SAU Community

Internal Wastegate Question...

Tebie

By Tebie,
in Engines & Forced Induction

 Share

Recommended Posts

Tebie Rising Star

Tebie

Posted
Posted

hi all,

i have a gt3076r with a internal wastegate

is it possible to weld the internal wastegate shut and use a external wastegate?

would that work?

would there be any benefits from this?

im just curious, i just want to get the right information because ive been told many different things

thanks

chris

Link to comment
https://www.sau.com.au/forums/topic/241085-internal-wastegate-question/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Well you'll only have benefits if the internal wastegate doesnt work correctly.

If its a proper Garrett housing, then it wont have problems and therefore you do not need one.

It will work, but i dont see the point. But the external gated version if you want it (they are cheaper too for just the turbo as the rear housing has no gate setup on it etc)

dano4127 Veteran

dano4127

Posted
Posted

But he is not going to get any benefits if the internal gate is working perfectly fine

If the turbo is new just take it back to the store and swap it for an external housing then go buy a waste gate

I am running a GT3582 with internal gate and no problems 15psi / 260rwkw

dangerman4 Mentor

dangerman4

Posted
Posted
But he is not going to get any benefits if the internal gate is working perfectly fine

If the turbo is new just take it back to the store and swap it for an external housing then go buy a waste gate

I am running a GT3582 with internal gate and no problems 15psi / 260rwkw

i agree dano

im also running a 3582r-iw at 330 rwkw's at 24 psi with no boost issues

but if the man's convinced on chaning for some reason, dont weld the standard one just change housings.

dano4127 Veteran

dano4127

Posted
Posted
i agree dano

im also running a 3582r-iw at 330 rwkw's at 24 psi with no boost issues

but if the man's convinced on chaning for some reason, dont weld the standard one just change housings.

Nice, I am hoping to push it up to around 20psi next tune to see what it does, what size rear you running?

At the end of the day if I had to go external with my setup I will just weld the gate cause the price of housings from garrett are nuts considering I probably wouldn't be able the sell the IW housing too easily

At this stage I honestly dont see the internal gate being a problem...

dangerman4 Mentor

dangerman4

Posted
Posted
Nice, I am hoping to push it up to around 20psi next tune to see what it does, what size rear you running?

At the end of the day if I had to go external with my setup I will just weld the gate cause the price of housings from garrett are nuts considering I probably wouldn't be able the sell the IW housing too easily

At this stage I honestly dont see the internal gate being a problem...

.82 and mines a auto rb25

Tebie Rising Star

Tebie

Posted
  • Author
Posted

the be 100% honest

the only reason why the though of welding the internal gate shut was because i want a top mount manifold

and every single damn manifold i have come across all are made for external wastegates

so the thought of welding the internal gate shut popped up in my head... :P

dano4127 Veteran

dano4127

Posted
Posted
the be 100% honest

the only reason why the though of welding the internal gate shut was because i want a top mount manifold

and every single damn manifold i have come across all are made for external wastegates

so the thought of welding the internal gate shut popped up in my head... :blink:

you can still run it high mount, Mine is!

Rather than bastardize your turbo just weld a bit of plate over the gate pipe - that's exactly what I have done

dano4127 Veteran

dano4127

Posted
Posted

yeah of course it works!

Will cost you next to nothing if you have the manifold off the car...

Then if one day you feel the need to have an external gate and screamer its just a matter of grinding off the plate and putting an external on.

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

make a plate and bolt it to the manifold, use locktight and use some high temp goo around it to make sure it seals properly.

that way you don thave to take the manifold off if you change your mind

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...