Jump to content
SAU Community

Recommended Posts

hey ppl

just a question regarding engine oil

how much oil does a R34 gtt need?

im just changing oil and ive dumped the old stuff and it bareley looks like theres 2 and a half litres that ive dumped is this low? should of checked the dipstick b4 dumping but obviously too late to do that now

lol

thanks

jason

Link to comment
https://www.sau.com.au/forums/topic/241675-could-be-a-silly-question/
Share on other sites

??? Im not sure if its the same but an rb26 is about 4.6 litres at minimum; most people put in 5 for extra protection around high speed bends.

2.5litres is waaaaay to low; did your oil light ever come on?

ha yeah thought it was a bit low nah no oil light

i was guessing about 4.5 litres

all good now thanks

Yea my r33 has perfect oil level at 4 litres. Did an oil change in a mates R34 and had to use the full 5 litres and it just hit the minimum line on the dip stick... wierd.

that is weird, i usually put 4.5 - 5 litres, seems to fill her up nicely ( R34)

Yea my r33 has perfect oil level at 4 litres. Did an oil change in a mates R34 and had to use the full 5 litres and it just hit the minimum line on the dip stick... wierd.

Im sure your not that silly, but was this before you filled the filter?

Im almost 100% positive that the OEM manual says that they take 4.5 litres.

Thats what i always put in mine and it doesnt go above the F mark. Even 5L (that i put in for track, maybe a little over) it didnt show a great increase on the stick either.

Im sure your not that silly, but was this before you filled the filter?

Im almost 100% positive that the OEM manual says that they take 4.5 litres.

Thats what i always put in mine and it doesnt go above the F mark. Even 5L (that i put in for track, maybe a little over) it didnt show a great increase on the stick either.

Was after, filled with oil. Ran the car to fill up the filter. Then checked the level, and then added more oil and kept checking. Found it real strange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...