Jump to content
SAU Community

Recommended Posts

I've just check this for the first time in 2 years of owning my R as I'm about to go on a long trip. I'm pretty sure its never been out of the boot so I checked the pressure which was 13psi. I pumped it up to 32psi as I couldn't convert 4.2kgs/cmsq to psi on the spot (the rest is in Japanese so I'm presuming this is a max or recommended pressure) so thought I stop there. When I got to the office I came up with 4.2 kgs/cmsq = 59psi which sounds very high.....

So my question is a) can someone confirm that 4.2 is 59 and b) that this sounds right? At 32psi the thing bounces like a like a rock........

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/242360-space-saver-spare/
Share on other sites

yeah 60psi is right for the spave savers. wear goggles when inflating! haha.

also when your ap's brakes are on you'll need to toss the space saver in the bin and pray you never get a puncture.

yeah 60psi is right for the spave savers. wear goggles when inflating! haha.

also when your ap's brakes are on you'll need to toss the space saver in the bin and pray you never get a puncture.

Yep. I've sourced a 5th R34 GTR wheel and will have something fabricated to hold it down in the boot recess as best as possible. Oh the joys of modifying cars.

yeah they will clear the standard front brakes (have a very funny shape to do so).

but realisticly, even if you have changed your front brakes you can still use it on the rear - so if you are unlucky and get a flat front put the back wheel on the front and the space saver on the back. and pull the 4wd fuse under the bonnet if applicable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...