Jump to content
SAU Community

Recommended Posts

Hi guys

I have the following sets of wheels up for sale.

1) Volk TE37's, Bronze in colour. Size 17x8.5 +30 all round PCD is 114.3. These wheels are in brand new condition with not a mark on them. They come with yokohoma advan A046 tyres. The price for these is $1950.

DSCN1185.jpg

DSCN1183.jpg

DSCN1186.jpg

2) Volk GT-C's, Silver in colour with polished lip. Size is 17x8 +35 and 17x9+37 the PCD of these is 114.3. These wheels are in good condition with no marks to the exterior face. They come with Bridgestone potenza g3 tyres in 235x40 and 255x40 sizes.

The price for these is $1750.

DSCN1192.jpg

DSCN1191.jpg

3) Work emotion XD9's silver in colour. The size of these is 17x8.5 +25 all round. PCD is 114.3. These wheels are in perfect condition. They come with a set of Bridgestone RE01R tyres. The price for these is $1800

DSCN0539.jpg

DSCN0537.jpg

4) Work XSA's these are in work black metal coat finish. This is a set of two only. The size of these is 18x9.5 +21. PCD is 114.3. These wheels are brand new and still in the box. The price for these is $1150 and is for two wheels only however a nother pair can be supplied if desired.

DSCN1188.jpg

DSCN1181.jpg

DSCN1189.jpg

All wheels are located in Sydney and available for shipment interstate however this will be at the expense of the buyer. I can be contacted on 0402348204.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/242551-volk-and-work-wheels-for-sale/
Share on other sites

Hi guys

I have the following sets of wheels up for sale.

1) Volk TE37's, Bronze in colour. Size 17x8.5 +30 all round PCD is 114.3. These wheels are in brand new condition with not a mark on them. They come with yokohoma advan A046 tyres. The price for these is $1950.

DSCN1185.jpg

DSCN1183.jpg

DSCN1186.jpg

2) Volk GT-C's, Silver in colour with polished lip. Size is 17x8 +35 and 17x9+37 the PCD of these is 114.3. These wheels are in good condition with no marks to the exterior face. They come with Bridgestone potenza g3 tyres in 235x40 and 255x40 sizes.

The price for these is $1750.

DSCN1192.jpg

DSCN1191.jpg

3) Work emotion XD9's silver in colour. The size of these is 17x8.5 +25 all round. PCD is 114.3. These wheels are in perfect condition. They come with a set of Bridgestone RE01R tyres. The price for these is $1800

DSCN0539.jpg

DSCN0537.jpg

4) Work XSA's these are in work black metal coat finish. This is a set of two only. The size of these is 18x9.5 +21. PCD is 114.3. These wheels are brand new and still in the box. The price for these is $1150 and is for two wheels only however a nother pair can be supplied if desired.

DSCN1188.jpg

DSCN1181.jpg

DSCN1189.jpg

All wheels are located in Sydney and available for shipment interstate however this will be at the expense of the buyer. I can be contacted on 0402348204.

Thanks

those XSA's are awesome. do you knwo fi they come in a 5x100 pcd? 18x8"?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...