Jump to content
SAU Community

Recommended Posts

2.3MB! Reduce your image size Manda :O

It's the control unit for a Defi VSD BASIS heads-up display.

The display unit, that sits on your dash, is meant to look like this:

image.jpg

Edited by scathing
2.3MB! Reduce your image size Manda :D

It's the control unit for a Defi VSD BASIS heads-up display.

The display unit, that sits on your dash, is meant to look like this:

image.jpg

Sorry about that i was too excited. That great that it has that . Will it work in australia ?

So do these things work here chris or do they have to be tampered with ? Will this affect the compliance of the car or not ? Also the car has 4 l.e.d lights under the car which turns they are very small but i like them are they illegal or will they have to be taken off for the compliance too.

As in regards to the stero its a after market panasonic one its all in japanese and when you switch the car on it says something. I tried a dvd in the player inside the glove box and it worked , so thats good.

How much is it costing to change the everything nav , etc or just the fm radio to work.

Also do you know what that power button on the dash is for ?

post-55737-1225551610_thumb.jpg

ok,

navi - bin job.

radio - doable.

screen will have to come out as its in the way for frontal collision rules.

radio is OE in the car. power button on the dash runs it.

LEDS under car - depends who complies the car. if its done by one of the shops I do I'll remove them.

call me - easier to discuss that way.

out of interest is the dvd player that played the dvd in your glove box the standard one?

its in the glove box the standard player that pops out of the dash has been taken out and some panasonic one put in. The dvd player is also a panasonic one that in the glove box .

post-55737-1225715312_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...