Jump to content
SAU Community

Recommended Posts

Ok so i have gone out and ordered a full Impul kit with a carbon bonnet with a Ztune style vent in it, My question is has any-1 got a pic of a white R34 with a carbon bonnet or have a R34 with a carbon bonnet that could post some pics up for me :( as im alittle un decided if i want the boot aswell, also looking into the carbon eyelids if any-1 has a pic of with a carbon bonnet that would be great

post-29112-1225608758_thumb.jpg

post-29112-1225608743_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/
Share on other sites

So none in this thread?

http://www.skylinesaustralia.com/forums/R3...se-t146573.html

There was definately one posted of a White 34 with a carbon bonnet only days ago... look for the one with the nismo kit like mine.

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4241590
Share on other sites

So none in this thread?

http://www.skylinesaustralia.com/forums/R3...se-t146573.html

There was definately one posted of a White 34 with a carbon bonnet only days ago... look for the one with the nismo kit like mine.

out of all those pages not one with a boot :down:

thanks for the link thoe howie

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4241682
Share on other sites

That's cool. One person I know who had the carbon bonnet and carbon boot, was Phuman's old white R34. If you do a search on previous Adelaide Autosalons or Small Car Sundays you should find his car there. Personally I think the carbon boot looks out of place if you don't paint the top half black (panda style).

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4241722
Share on other sites

Here's a couple of pics of my cars bonnet. I was thinking of getting a carbon bootlid but it may look a little too much.

I also have a set of carbon eyelids but i didn't put them on because they looked a bit naff. So i'm either painting them white or selling them for a carton.

post-17465-1225956878_thumb.jpg

post-17465-1225956983_thumb.jpg

Edited by [ANGRY13]
Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4245268
Share on other sites

hey i got the same bonnet and it looks great!!!! the only issue with it is when it rains alot water gets into the coilpacks making the car run like sh*t untill it drys out

that's what i was thinking about aswell :D i dont think the coil packs will be to bad with the NEO engine thoe

We have R34 bootlids in carbon, not sure what the difference in the sedan to coupe is though.

and cant wait till it comes in ;)

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4252758
Share on other sites

hey i got the same bonnet and it looks great!!!! the only issue with it is when it rains alot water gets into the coilpacks making the car run like sh*t untill it drys out

doesnt it come with, or cant you get a sort of backing plate for under the vents for those rainy days? im sure i've read about this before with vented bonnets including the z-tune style one

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4253037
Share on other sites

doesnt it come with, or cant you get a sort of backing plate for under the vents for those rainy days? im sure i've read about this before with vented bonnets including the z-tune style one

would be great if you could find that again :wub: i suppose it would't be to hard to make something up like that thoe ;)

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4253481
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...