Jump to content
SAU Community

Recommended Posts

Hey guys i have been hearing some mixed opinions lately about the overdrive switch in my car and others.

I have heard that its good to leave overdrive on at all times and i have also heard its good leave overdrive off until you hit around 70km/h.

I have heard having it on all the time is good for fuel economy too although its not healthy for the gearbox?

Is there a definitive answer or is it just one of those "what you prefer" situations..

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/
Share on other sites

Personally i never use 6th gear unless im on the freeway; 5th is the highest ill go on a highway.

Overdrive is great when you can keep a nice a smooth speed of over 60kph without having to slow down; etc comming home from work in traffic.

keep it off when you wanna weave through light traffic; feels great and much more responsive.

on the great ocean road; you would not turn on the overdrive.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235937
Share on other sites

Personally i never use 6th gear unless im on the freeway; 5th is the highest ill go on a highway.

Overdrive is great when you can keep a nice a smooth speed of over 60kph without having to slow down; etc comming home from work in traffic.

keep it off when you wanna weave through light traffic; feels great and much more responsive.

on the great ocean road; you would not turn on the overdrive.

Yer i can see where your coming from, but in my situation, which is not relatively hard driving around the local streets would it be best to have it on or off?

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235961
Share on other sites

Definitely off mate and leave the power button off too; just normal mode.

going round residential roads and looking out for parked cars and street signs you wouldnt want it to jump into 4th gear when the 50km zone suddently has a hill or incline.

if you were in 4th you would have to put the foot down and you may be unlucky enough to hit the kickdown into 2nd; which is quite violent on the engine and gearbox.

I blew rocker arms off my sr20 s15 auto cos it drops down very quickly and the rev's shoot up

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235979
Share on other sites

Ah yer i have noticed that, put your foot down and then it just downshifts and revs sky rocket up.

Well thanks for your advice man, i will turn it off tomorrow and see how we go :D

Leave it on all the time. Save petrol, engine wear. Now that you know there is a kickdown switch you won't be surprised by what happens when you floor the pedal. You can develop a smooth driving style by managing the accelerator pedal to keep it in the highest possible gear and with practice you can make it go into 3rd or 2nd at will. The only time i would turn it off is if you are going down a steep hill while towing or if you are giving it hell through a winding stretch and you want to hold it in 3rd.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4236235
Share on other sites

Leave it on all the time. Save petrol, engine wear. Now that you know there is a kickdown switch you won't be surprised by what happens when you floor the pedal. You can develop a smooth driving style by managing the accelerator pedal to keep it in the highest possible gear and with practice you can make it go into 3rd or 2nd at will. The only time i would turn it off is if you are going down a steep hill while towing or if you are giving it hell through a winding stretch and you want to hold it in 3rd.

Just to clarify (looking at your other post there sems to be room for misunderstanding) when i say leave it on i mean normally leave the overdrive in operation i.e. do not use the overdrive off switch except as above.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4236653
Share on other sites

ok back to confusion haha!

overdrive is off when the light on the dash says overdrive off

overdrive is on when the light on the dash is not displayed

So basically for local driving it is best to have overdrive on which means the button should be pushed in leaving no light on the dash!

Correct or..

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4237763
Share on other sites

ok back to confusion haha!

overdrive is off when the light on the dash says overdrive off

overdrive is on when the light on the dash is not displayed

So basically for local driving it is best to have overdrive on which means the button should be pushed in leaving no light on the dash!

Correct or..

correct.. thats what i would normally do. i normally just leave it on which means no lights on dash, except up hill and towing

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4237819
Share on other sites

id love to see a comparison. between a full tank off petrol when the overdrive was not used and a full tank of petrol when the overdrive was left on. similar driving on both.

I have a feeling there may be a few suprises.

I would not sue overdrive unless I was going to stay at a constant speed above 80kmh for awhile

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4238219
Share on other sites

Leave overdrive enabled (no light on the dash), let the computer do the work of selecting gears, learn to modulate the throttle pedal so you get good economy and make it kick down whenever you wish.

As stated above only time I'd turn it off is for engine braking/caning through twisties.

Overdrive = 4th gear/top gear

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4238706
Share on other sites

while we are on the topic, what about manually down-gearing?

As in its in drive, slowing down for a corner and push it into 2nd at around 50ks...

Is this practise ok for auto-trannies?

I usually drive with the over-drive off during normal <70km/hr driving. If i get on the freeway/highway then i engage overdrive (or 4th gear). In a manual you dont go into 5th when doing 50km/hr do you? How would putting overdrive on (or not turning it off) cause less engine wear?

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4239970
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...