Jump to content
SAU Community

Recommended Posts

Hey all,

My friend has a R32 GTR, running single high mount conversion, 50mm Ext. wastegate venting to screamer pipe, runs around 1 bar.

The other day we were giving it some stick along some country roads, wastegate opened and screamer sounded as normal, but when we slowed down to idle we noticed the car had a strange exhaust note.

Got under the car as it sounded like an exhaust leak, and found exhaust passing thru the screamer pipe at idle. From what he thinks the wastegate is staying open and not holding pressure. Could the gates diaphragm or spring be stuffed? Any ideas?

Were taking it off this weekend to have a look at it, just want to know if anyone else has had a similar problem before we do, and whether its worth just buying a new one to replace it.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/243259-screamer-pipe-flowing-constantly/
Share on other sites

wastegate valve is not seating properly for whatever reason. sometimes the seat of valve may be damaged, spring may be faulty. it's a bit hard to diagnose away from the car. only way to see what's up is in the first instance unbolt the screamer so you can see the valve at idle (if the gate is positioned so you can do it that is.).

i wouldn't rush out to buy a new one though. try and figure out what the gate is opening at idle first.

nothing i dont have 1 in the car thats why i need 1.......
Hey all,

My friend has a R32 GTR, running single high mount conversion, 50mm Ext. wastegate venting to screamer pipe, runs around 1 bar.

The other day we were giving it some stick along some country roads, wastegate opened and screamer sounded as normal, but when we slowed down to idle we noticed the car had a strange exhaust note.

Got under the car as it sounded like an exhaust leak, and found exhaust passing thru the screamer pipe at idle. From what he thinks the wastegate is staying open and not holding pressure. Could the gates diaphragm or spring be stuffed? Any ideas?

Were taking it off this weekend to have a look at it, just want to know if anyone else has had a similar problem before we do, and whether its worth just buying a new one to replace it.

Cheers

I would be checking the spring inside the waste gate and maybe replacing it and checking that both pressure port lines on the wastegate are connected.

Edited by DRS Customs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...