Jump to content
SAU Community

Recommended Posts

The PRofec B is our answer to a number of tuners and enthusiasts who wanted a GReddy boost controller that was less expensive–and demanding–than the PRofec. The fuzzy-logic PRofec is still the ultimate controller but its programming requires patience–and consistent engine parameters. The engine can't have occasional leaks or suffer "boost creep." The PRofec B is a great choice for street cars and those equipped with sequential turbochargers. It's not recommended for large-displacement engines with small turbos or quick-response turbos.

Features of the PRofec B:

Solenoid valve used to adjust boost pressure

Offers high-boost and low-boost selection points

No extensive programming needed

Dip switches on back used for integral or external wastegates

The PRofec is an electronic boost controller that employs fuzzy logic. Its powerful CPU allows your engine to be at the razor edge of performance more often, safely. In its learn mode, our hardware and software process data from the vehicle and, using this more intelligent, interactive "mapping," the PRofec's stepping motor not only controls, but anticipates boost spikes.

Unlike most computers that only operate in "black and white" (1's and 0's), fuzzy logic can "think" in shades of gray and "learn" direct answers to problems. Where normal computers stair-step in "yes" and "no's," fuzzy logic can go straight to the answer.

In recent years, fuzzy logic has gained popularity on everything from the famous bullet trains in Japan to washing machines and thermostats. The latter is a great example when we look at fuzzy logic's application in the PRofec. Standard on/off thermostats will turn on the heating or air conditioning when the air reaches the set temperature. Fuzzy logic thermostats turn on the A/C or heat a little as the temperature approaches the specified value.

When it comes to boost control, standard electronic controls will open the wastegate at a specified boost pressure. In some cases, the desired boost can be reached too fast for the controller to act, and harmful overboost can occur. Fuzzy logic, on the other hand, actually learns how fast your engine approaches maximum safe boost and starts to open the wastegate at the appropriate time so you never get into an overboost condition. Fine-tuning your vehicle to the highest safe boost setting eliminates the need for a wide safety margin to compensate for potential overboost

Link to comment
https://www.sau.com.au/forums/topic/24402-greddy-profec-b/#findComment-521440
Share on other sites

CONAN= Yes it is second hand

RbHed= This is taken direct from Greddy web page.

The PRofec B is our answer to a number of tuners and enthusiasts who wanted a GReddy boost controller that was less expensive–and demanding–than the PRofec. The fuzzy-logic PRofec is still the ultimate controller but its programming requires patience–and consistent engine parameters. The engine can't have occasional leaks or suffer "boost creep." The PRofec B is a great choice for street cars and those equipped with sequential turbochargers. It's not recommended for large-displacement engines with small turbos or quick-response turbos.

Features of the PRofec B:

Solenoid valve used to adjust boost pressure

Offers high-boost and low-boost selection points

No extensive programming needed

Dip switches on back used for integral or external wastegates

Link to comment
https://www.sau.com.au/forums/topic/24402-greddy-profec-b/#findComment-527198
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...