Jump to content
SAU Community

Recommended Posts

Not really pointless IMO as it shows how much a step forward in performance from the factory the R35 is, by comparing it to well regarded and tuned examples of former models

I've watched the DVD and at the end tsuchiya makes the remark that the r35 was faster in the corners, just the long straight was what kept the tuned cars in front

Edited by Yo-Yo

Best Motoring GTR Loaded DVD.

I got it and watched that race and it was nuts.

R32 GTR 400PS

R33 GTR 600PS (2.8lt stroker kit)

R34 GTR 600PS

R35 GTR Stock

At first I thought it was abit unfair to the R35 as all the other GTR's were tuned, but judging from the finish times, it came 3rd and the times were very close, all within a difference of seconds.

As for the R32 GTR, with only having 400PS, it still kept up very well and kept the race tight.

As keiichi Tsuchiya was saying, the tyres were starting to wear down and was slipping / lossing traction, which I believe due to the weight of the car and every setting set to R Mode, it gave the car a good thrashing.

Just goes to show how a stock R35 GTR can stand its ground up against highly tuned GTR's and only afew seconds slower is very impressive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...