Jump to content
SAU Community

Just Finished Getting A Toshi Remap

DrewII

By DrewII,
in Engines & Forced Induction

 Share

Recommended Posts

Cubes Grand Master

Cubes

Posted
Posted

Back in the day you your required a highflow to push over 200rwkw.

These days the dyno's push 200rwkw on stock turbo's so I believe its just the dyno's reading a little happy.

The dyno I run on typically 190rwkw is what a stock turbo'd r33 can achieve with the usual boost - 12psi, tune, exhaust & fmic. Throw an adj cam gear on and you can squeeze it a little over 200rwkw.

As R31Nismoid says the power figures 'these days' just don't add up with the MPH.

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

33gtst Proficient

33gtst

Posted
Posted

yeah mine was done by someone in melb and on 10psi and im making just shy of 185 (on a spazz tune that has huge flat spot) only wished Toshi would come to melb so mine can be fixed up!

I dont know about "safely" on the std turbs, some shit themselves at minimal boost my concern is how it drives, mines a shit bastard to drive afterwards as fark all light throttle and cruising adjustments are made, mine feels like I have lag as soon as the air gets cooler...although I like the extra 20 odd kw, I really dont think its worth the headache if your car is in standard form.

DrewII Community Regular

DrewII

Posted
  • Author
Posted

to answer your questions you cannot compare the "drive" of my setup now and before. before it felt like shit. rough, flat spots, not a very smooth band of power at all. now it feels much more refined but at the same time injecting more power with each gear. even at low rpm on low boost feels so much smoother.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
so rb20's will just make 200rwkw with rb25 turbos but rb25's wont?!?

depends if your from WA or not i think mainly.

Generally you see RB20s make around 170-185rwkw on 14psi or so with the RB25 turbo (going by the results in the RB20 dyno thread)

DrewII Community Regular

DrewII

Posted
  • Author
Posted

i think he meant R32s with full RB25DET conversion. no way a RB20 with RB25 turbo can make 200kw.

depends if your from WA or not i think mainly.

Generally you see RB20s make around 170-185rwkw on 14psi or so with the RB25 turbo (going by the results in the RB20 dyno thread)

J3TR33 Community Regular

J3TR33

Posted
Posted
If you want a remap. Sam AKA Dr Drift does them and is conveniently located in Melbourne ...

i don't think he does the R33 Remaps, he installs a daughter board on the R33 ecu making it live tuneable... and that costs over 1k plus tune costs..

or else id be happy to go to him for a remap..

phatlavish Mentor

phatlavish

Posted
Posted
i don't think he does the R33 Remaps, he installs a daughter board on the R33 ecu making it live tuneable... and that costs over 1k plus tune costs..

or else id be happy to go to him for a remap..

thats what Toshi does :banana:

robmbt Rookie

robmbt

Posted
Posted
Back in the day you your required a highflow to push over 200rwkw.

These days the dyno's push 200rwkw on stock turbo's so I believe its just the dyno's reading a little happy.

The dyno I run on typically 190rwkw is what a stock turbo'd r33 can achieve with the usual boost - 12psi, tune, exhaust & fmic. Throw an adj cam gear on and you can squeeze it a little over 200rwkw.

As R31Nismoid says the power figures 'these days' just don't add up with the MPH.

All figures aside as i believe that you can go to 3 different dyno's and get 3 different readings... how confident is anyone about how much power they are putting out... 1/4 mile times also is not all about power i think set up and driver ability come into it as well. ..... I am very happy with the way my car performs now after a remap from Toshi.... I am not going to modify my car any further and it did seem to have a flat spot in the mid range before ... after the ecu was changed over i noticed a big difference in the way the car pulls under heavy acceleration was much better than before and appears to do it through out rev range, car seems much quicker, smoother and power is more linear (i did up the boost a little as well)...

i just got 509kms out of 52.7 ltrs was mainly open road driving with occasional squirts thrown in as i was wanting to see how good my economy was as well (did change O2 sensor) but all in all DRIVABILITY , power and fuel economy is all good and im very happy for the money I spent. I dont have the fastest car on the road but it is quick and it runs well :-) was a good option for me........my 2 cents worth.....

SimonR32 Grand Master

SimonR32

Posted
Posted (edited)
depends if your from WA or not i think mainly.

Generally you see RB20s make around 170-185rwkw on 14psi or so with the RB25 turbo (going by the results in the RB20 dyno thread)

its wierd how wa dynos make so much power, but then when you send over "eastern spec" mainline dynos over for autosalon we still make more power than you... maybe the air is just more oxygenated over here?!? haha

i think he meant R32s with full RB25DET conversion. no way a RB20 with RB25 turbo can make 200kw.

ooooooooooooooooo really

dyno1.jpg

Edited by Cerbera
DrewII Community Regular

DrewII

Posted
  • Author
Posted
All figures aside as i believe that you can go to 3 different dyno's and get 3 different readings... how confident is anyone about how much power they are putting out... 1/4 mile times also is not all about power i think set up and driver ability come into it as well. ..... I am very happy with the way my car performs now after a remap from Toshi.... I am not going to modify my car any further and it did seem to have a flat spot in the mid range before ... after the ecu was changed over i noticed a big difference in the way the car pulls under heavy acceleration was much better than before and appears to do it through out rev range, car seems much quicker, smoother and power is more linear (i did up the boost a little as well)...

i just got 509kms out of 52.7 ltrs was mainly open road driving with occasional squirts thrown in as i was wanting to see how good my economy was as well (did change O2 sensor) but all in all DRIVABILITY , power and fuel economy is all good and im very happy for the money I spent. I dont have the fastest car on the road but it is quick and it runs well :-) was a good option for me........my 2 cents worth.....

i agree with you. its easily not the fastest on the road but damn i feel it is definitely quick enough now. and quick enough to put a lot of cars to shame too. before i dunno i just didnt have the confidence that the car was running as well or was as quick as it should be. this remap was all it needed.

bubba Grand Master

bubba

Posted
Posted
i think he meant R32s with full RB25DET conversion. no way a RB20 with RB25 turbo can make 200kw.

You theory is flawed.

By what you're saying, I should be making 220rwkw because I have an RB25 turbo on an RB30..

A turbo will make the same power on whatever motor it is on because it can only flow "so" much air. Smaller or larger capacity will just make the power later or sooner.

I also resent the WA reference, not all of us are dyno fiddling dodgy brothers :D

Douse Collaborator

Douse

Posted
Posted (edited)
I also resent the WA reference, not all of us are dyno fiddling dodgy brothers :)

I second that.

I am running a RB20 with normal bolt on mods, GTR injectors, GTR fuel pump, R34 RB25 turbo and a Nistune Remap and I am making 195kw.

Next thing needs to be AFM.

post-40125-1227171576_thumb.jpg

Edited by Douse
DrewII Community Regular

DrewII

Posted
  • Author
Posted
I second that.

I am running a RB20 with normal bolt on mods, GTR injectors, GTR fuel pump, R34 RB25 turbo and a Nistune Remap and I am making 195kw.

Next thing needs to be AFM.

nice curve impressive. i didnt think R32s with RB25 turbos could make so much power

Douse Collaborator

Douse

Posted
Posted
nice curve impressive. i didnt think R32s with RB25 turbos could make so much power

Cheers, unfortunately I don't know what the before and after was for the JUST the remap, as I installed the turbo and injectors, towed it to the shop and got it tuned.

So i noticed a huge difference, but it wasn't all from the tune obviously :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...