Jump to content
SAU Community

Recommended Posts

From those pics it looks like there is about $2500 worth of damage. Some c*nt backed into the front of mine not long ago and took out 1 headlight and pushed the bumper slightly out of whack. It took a $1200 bill to fix it. I'm lucky insurance covered it. The headlight was $538 alone!

im on 3rd party fire and theft only. i have to foot the bill for this one. im gonna prob beat out the bonnet. i figured the damage was worth that much tho. it sucks major a**

riggaP, whered u get urs fixed? im trying to find some good smash repairers around. i dont know of any import specialists ones.

Sorry 2 say mate but the GTR bar doesn't fit on a GtsT without some major mods......GTR is wider than a Gtst therefore bar width has to be reduced.....

. . .

They say minor mods? but it can be done.. Jetspeed is useless at telling you exactly how they adapt it to fit, just that it don't fit straight on.

Dj_l3thal spoke to IQ Auto and they said it was an "easy" job to heat melt it into the right shape.

i was under the impression getting gts't GTR Front bars was quite easy? As in, quite a few places have them, and they are made to fit GTS'T's only?

Just wish there was a R34 GTR front bars for GT-T's!! :D

your looking at around $1500 to fix that + the price of a new front bar. u need by the looks of it a new re-enforcement bar, headlights(are they craked)? i did the same thing to my car not a Skyline rather a holden(hold the laughs) i got quoted between $1600 and $1100, but i went to a mates panel beatters in Ivanoh(spelling) got it done for $600 cash but i didnt replace the headlights , they where craked down the bottom.

i can give u the contact details of this panel better if u want. just PM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...