Jump to content
SAU Community

Steering Problem.

R DIRTY 3

By R DIRTY 3,
in Western Australia

 Share

Recommended Posts

R DIRTY 3 Grand Master

R DIRTY 3

Posted
Posted

This is regarding an R33 GTST.

I have a client if you will, who has the above mentioned car. The owner purchased a set of coilovers from me on Tuesday afternoon. Fitting the coilovers was to be completed tonight by the owner (Ryan "SKYRYAN") and his offsider (Karl "inthisglass").

So i was at a pub having a few drinks when my phone rang. It was said offsider, who i will not name *cough* (Karl), who rang me with a dilemma they were having with the vehicle. I was told that the car was on axle stand but they were stuggling as there was a problem with the steering.

The conversation went similar to this........

OFFSIDER: "Brad should the steering be really tight when the car is jacked up?"

ME: "not really...how tight is it"

OFFSIDER: "It wont turn easy"

ME: "No, it should be fairly free, have you got the steering lock off?"

OFFSIDER: *yells* Ryan, wheres your car keys"

Small voice in the background: "over there"

Phone conversation goes silent......awkward pause.

ME: "good night, have fun!"

Laughter all round!

Maybe best to look for the simple solutions first before you rely on the help of an expert who will post your stupidity up on a public forum!

Ryan and Karl, you are idiots! :D :D :P :P :P :P

Im sure Ryan and Karl would love to hear your thoughts of this situation in this thread :P

Link to comment
https://www.sau.com.au/forums/topic/245762-steering-problem/
Share on other sites
342Four Grand Master

342Four

Posted
Posted

LOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLO

LOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOL

OLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLO

LOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOL

OLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLO

LOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOL

OLOLOL

*breath*

LOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLO

LOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOL

OLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLO

LOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOL

OLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLO

LOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLLOLOLOLOLOLOLOLOLOLOL

OLOLOL

it happens to the best of us

ive wondered my car wasnt starting, and it turned out i forgot to push the clutch in (the gheyundai has a switch on the clutch pedal that needs to be tripped b4 the car will start)....

inthisglass Grand Master

inthisglass

Posted
Posted

BARD, YOU must have had a few more drinks than your thought.

i asked you if the the wheels were meant to be hard to rotate NOT TURN

we had the rear jacked up and when we were putting the wheels back on the diff felt like it was getting tighter the more we spun the wheels forward

rysies is worried that his diff is farked and said to call you for your words of wisdom

in the end we got the coilovers in, with no other problems and skyryan is now slammed on its hole :D

Tezzah Experienced

Tezzah

Posted
Posted (edited)
BARD, YOU must have had a few more drinks than your thought.

i asked you if the the wheels were meant to be hard to rotate NOT TURN

we had the rear jacked up and when we were putting the wheels back on the diff felt like it was getting tighter the more we spun the wheels forward

Possibilities:

Handbrake on?..

He has a fan-dangle'd LSD which could do it...

Calipers tight on the Rotors...

It was in gear, you were cranking the engine...

rysies is worried that his diff is farked and said to call you for your words of wisdom

Calling a suspension expert about diffs? LOL brad aint god =P

Edited by Tezzah
SKYRYAN Grand Master

SKYRYAN

Posted
Posted
Possibilities:

Handbrake on?..

He has a fan-dangle'd LSD which could do it...

Calipers tight on the Rotors...

It was in gear, you were cranking the engine...

Nobody is that stupid :D

Calling a suspension expert about diffs? LOL brad aint god =P

But I'm sure he has spun a few rear wheels while the cars are jacked up, yeah?

Don't make me come lack-band your arse, Terry.

Tezzah Experienced

Tezzah

Posted
Posted
But I'm sure he has spun a few rear wheels while the cars are jacked up, yeah?

Unlikely, he is in sales...

Possibilities:

Handbrake on?..

He has a fan-dangle'd LSD which could do it...

Calipers tight on the Rotors...

It was in gear, you were cranking the engine...

+1

All brake pads will be pressing against the rotor's by default, some more then others.

I don't suppose you noticed if both wheels were spinning?

If they both were spinning, was it in the same direction, or different directions?

If only one was spinning, i'd be more worried about that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...