Jump to content
SAU Community

Recommended Posts

Today I was driving home on Mona Vale Rd at around 70-80km/h when my car stalled. Stalled as in engine off, no power steering, no power assisted brakes. Gauges not working and all in dash lights out.

At the time I was playing music loudly and driving with my head lights on.

Tried to start the car, it would only turn over, no in dash lights, not even Air bag or HICAS. However, my music continues to play, air con continues to work and my clock didn't reset.

After about 30 seconds the dash comes to life and I start the car. Everything sounds as normal. After about 10 mins of driving I decide to see if my car is in limp home mode. Stock boost gage measured full boost where it usually does, revs to 7,000 rpm like it usually does.

I get home, pop the bonnet and try to replicate the problem by loading up the car electrically. Nothing happens. At this point I am relieved and decide to get on with my life, by washing my car.

I drive my car onto the grass and just before I put my hand on the keys it stops. Like before, gauges and lights are dead. This was about an hour ago and it won't start again.

So, what have I eliminated thus far...

Battery/Alternator - Car cranks over just fine

Fuses - All fuses (or at least the ones I can get at) are not blown

Relays - Like fuses, none of the relays show signs of damage

Immobiliser - Immobiliser doesn't cause the dash to die...

My car is stock except for alarm and immobiliser...

Things that I have found odd...

Disconnecting and reconnecting my CAS used to cause some relays to energise and de energise. It doesn't any more.

Fuel pump won't prime at all.

Windows won't go up

Like I said, I'm really at a loss. I wanted to go to Oran Park tomorrow, but it looks like that has gone to shit as I need to fix my car before Monday so I can get to work.

Thanks for any imput

Cass

Link to comment
https://www.sau.com.au/forums/topic/245857-engine-cranks-doesnt-start/
Share on other sites

car wont start with less than 12.6 V

so it can crank over, but not start - if its cranking and no dash lights - its definately the battery voltage issue

just jump start it

Just tried to jump start my car, didn't change a thing. Starter motor works really well though lol

To tell you the truth I'm relieved, if it started that probably would have meant I would be up for an alternator as I'm pretty sure cars aren't usually designed to run off the battery while driving :)

I'm now gong to attack the relays under the dash. I have a feeling that my problem is something to do with them...

Thanks for the help :happy:

I had the same problem a few weeks back,

-car shut off during driving

-no power steering/indicators/power windows/dash light

-stereo working fine

-it turns over but wont start

Problem turned out to be that on the back of the immobilizer circuit board, one of those small solder has burned off.

I had the same problem a few weeks back,

-car shut off during driving

-no power steering/indicators/power windows/dash light

-stereo working fine

-it turns over but wont start

Problem turned out to be that on the back of the immobilizer circuit board, one of those small solder has burned off.

I pulled apart my immobiliser, everything looks pristine there. However...

After swapping a relay under the dash with a relay that I had randomly lying around... my car now starts! :) One of the terminals on the old relay was loose... I'd say it rattled itself to death getting me home :happy:

Anyways, I'm stoked! Well... a little pissed off that I missed out on Oran Park today but still, it now works!

Thanks for your help Chris/Daniel/JOn (who didn't post here... but yeah) :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice one, I'd argue that the white S1 RS260 is certainly the best looking of the Stageas. And yes, fully agree on the forum situation. It's a bit of a shame, but at least SAU is a good place to be. I found the facebook groups to give me FOMO because people were trying to one-up each other and show off in some way. Feels much more natural here. There are people with seriously nice builds, but I can appreciate it rather than it making me question my life choices. Might be that people are more open with sharing how much work/money/suffering it takes to actually get there. 
    • Evening, wanted to pop in and finally register to say hi to everyone here on SAU!   It's been a while since I've been active on a forum, but back in the day I used to be relatively active on ClubLexus and other hobby-related forums. I'm glad to see SAU is still around, since with the advent of Facebook and Discord it seems forums aren't what they once were. As a recent new owner of an S1 260RS Stagea, I've found so many older guides and helpful tips from SAU that I figured I needed to join and say a grave thank you. My recent acquisition has only become legal in the US for the past year, and knowing that similar car enthusiasts from across the pond have already figured out the kinks and tricks to get these 25+ year old cars running well. I look forward to diving into more of the SAU forums as well as hopefully contribute some info myself for future posterity.   As a pic tax, here is one of the few good photos I have of my Stagea. I hope to get way more in the future!    
    • Is this where I say "Hey man my airbox cost me horsepower in my Naturally Aspirated Engine"? (I know you need them for legality in NSW)
    • 1.5mm alloy folded up, it will need a tweek, as the angled bend only got to around 45° as that was the max that the break press would get with the other bends, and I needed a fair bit more, but and the alloy is easy to bend too my will by hand once I trim the lower section out I'll Dremel out and form the angle and mounting point on the lower section when time permits  As for the lid, I'm looking at going a "cap", instead of a flat lid to hide the fixtures a bit
×
×
  • Create New...