Rb25 Connie..

[rad100]

well i just fnished a rb25det conversion in my 32...

s2 rb25det.

apexi turbo.

stock afm, injectors.

3" turbo back.

blocked off bov w/ 1piece intake pipe.

rb25det box.

now...

i can here wat seems like a bearing spinning coming from the box. nothing when idleing only when driving..

the noise gets louder as the revs raise. would it be the thrust bearing?

also,

car idles ok but when i rev it past 2k it stalls, driving it when i clutch in it stalls. now i have a pfc which has been set back to new and it does the same on this as with the stock ecu....

any ideas? is it just running too rich due to big turbo? is it coz the bov is blocked and i need to get a tune with this mod?

cheers in advance!

[phatlavish]

1. does it go quiet when you press the clutch in? sounds like it could be the spigot bearing

2. definitely the blocked bov causing the stalling.. have to give up the dose yo

[bish33]

+1 on the spiggot bearing mine also makes that whigning noise, its a pain in the ass cause u hav to take the box off just to put in a $5 part, as for the stalling would hav thout it was just the stock ecu mine used to stall wen i put a aftermarket bov on ther but ran fine wen i block it off. so i would just unblock it see how u go

[rad100]

1. does it go quiet when you press the clutch in? sounds like it could be the spigot bearing

2. definitely the blocked bov causing the stalling.. have to give up the dose yo

1. yes it does.. while the gears are engaged its noisy. i was hinking thrust bearing?

2. i have no bov return lines hence y i blocked it off.. and i got a 1piece intake pipe...

will c how it goes when i get it tuned.. this should fix it yeh?