Jump to content
SAU Community

Recommended Posts

Hi,

I bought these brand new Federal semi slicks last week and my intentions for the car have changed, so theyre up for sale. They are awesome tyres; they stick like sh1t to a blanket. My car is very powerful, and they handled it with ease. Very comfortable on the road with little road noise and no extra harshness.

The sizes are 235x45x17 and 255x40x17. The 235's are 595RS's with a UTQG of 180 and the 255's are 595RSR's with a UTQG of 140. The Federal rep said that this combination was perfect for street, track or motorkahna duties. For comparison, drag slicks usually have a tread wear rating of 60 to 80, and normal road tyres usually have a rating of around 240 to 300. I did a lot of research for these tyres, and for the price and all round performance (including wear resistance for street duties) these came up trumps compared to Toyo and Falken.

The fronts retail for $280 and the rears retail for $315, thats $1190 all up. Im asking $1000 for good as new tyres. They still have the little wobbly rubber things on them!

Contact me on 0414972596 for any queries.

Thanks,

Shaun.

post-11456-1227591480_thumb.jpg

post-11456-1227591571_thumb.jpg

post-11456-1227591641_thumb.jpg

post-11456-1227591788_thumb.jpg

For comparison, drag slicks usually have a tread wear rating of 60 to 80, and normal road tyres usually have a rating of around 240 to 300.

Drag slicks don't usually have a treadwear rating on them at all.

OK, Thanks for that. I read it somewhere in the tyre section. I did, however, mean DOT approved drag tyres like the Micky Thompsons etc, but im no expert on those.

Its safe to say that these Federals are quite a bit more wear resistant than the DOT approved drag slicks. Thats the point i was trying to make.

Shaun.

Its safe to say that these Federals are quite a bit more wear resistant than the DOT approved drag slicks. Thats the point i was trying to make.

They certainly are! These are bloody good tyres too.

FWIW, the DOT treadwear rating on Mickey Thompson ET Street Radials is...ready for this?

0

Zero

Zip

Nuthin'.

Hi,

I bought these brand new Federal semi slicks last week and my intentions for the car have changed, so theyre up for sale. They are awesome tyres; they stick like sh1t to a blanket. My car is very powerful, and they handled it with ease. Very comfortable on the road with little road noise and no extra harshness.

The sizes are 235x45x17 and 255x40x17. The 235's are 595RS's with a UTQG of 180 and the 255's are 595RSR's with a UTQG of 140. The Federal rep said that this combination was perfect for street, track or motorkahna duties. For comparison, drag slicks usually have a tread wear rating of 60 to 80, and normal road tyres usually have a rating of around 240 to 300. I did a lot of research for these tyres, and for the price and all round performance (including wear resistance for street duties) these came up trumps compared to Toyo and Falken.

The fronts retail for $280 and the rears retail for $315, thats $1190 all up. Im asking $1000 for good as new tyres. They still have the little wobbly rubber things on them!

Contact me on 0414972596 for any queries.

Thanks,

Shaun.

What size rims are these on? Are you selling the rims as well?

Theyre on 17 inch rims, and no, theyre not for sale. Just the tyres.

Thanks Dave, ive still got your offer in mind. Ill give it a bit more time yet, as im in no massive hurry. If you met me half way, however, they could be yours today! :)

Shaun.

Edited by Shaun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
×
×
  • Create New...