Jump to content
SAU Community

Bbs Lm Set Of 17x8 And 9

Bennett
 Share

Recommended Posts

Bennett Mentor

Bennett

Posted
Posted

Putting my rims up for sale as i need money for other things right now. They are BBS LM model wheels which are 2 peice lightweight forged rims. They are some of the best quality wheels you can buy. Sizes are 17x8 on the front and 17x9 for the rear. Offset is somewhere around +38 and +42 i think, I'll check to make sure though. They are in great condition with only 1 very small mark on one wheel. They can come with or without tyres. The front tyres are 235/45/17 RE01R's with a fair bit of tread left and the rears are 255/40/17 RE01R's getting low on tread and will need replacing soon. These tyres are in my opinion the best tyres available and perform brilliantly in both wet AND dry conditions. They are also worth over $300 each when new.

dsc04534qh9.jpg

Asking $1600 with tyres and $1200 without tyres.

Can ship if your willing to organise a courier.

PM me or post here if your interested. I can also be contacted on 0423712016.

Ask for more photos if needed and ill take some soon.

Located in SE suburbs or Melbourne.

Feel free to organise a time to come check them out.

Cheers :P

Link to comment
https://www.sau.com.au/forums/topic/246384-bbs-lm-set-of-17x8-and-9/
Share on other sites
Bennett Mentor

Bennett

Posted
  • Author
Posted (edited)

Hey guys. Took photo's today in the rain :(

Fronts are 17 x 8 +40

Rears are 17 x 9 +42

They also come with awesome BBS tyre valves.

frontleftot8.th.jpg frontrightdd2.th.jpg

rear1pd2.th.jpg rear2ra6.th.jpg

scrape1wd0.th.jpg scrape2cj9.th.jpg

tyrefront1tz2.th.jpg tyrefront2pe0.th.jpg

tyresrearlk6.th.jpg specsrear1zm6.th.jpg

Edited by Bennett

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...