Jump to content
SAU Community

Recommended Posts

Hey guys

Just put all my parts on like intercooler, full exhaust, boost controller. On the test drive it wouldnt go past 5500rpm and made like a spittting sound, really worried whats going on

Any ideas guys?

Go to spare parts shop, buy a set of BCPR7ES's. Gap them to .8 or .75 & install them.- Do not pass go. Do not collect $200

yeh, did that today and it got rid of the spitting problem

pretty odd though, everything is on right, but it looks like the car is running real lean, when we pulled the turbo off, and also the spark plugs, it was a bit white on the inside

i was told anyway that is a sign of it running it lean

getting a ecu to tune but is there a different way to richen it up in mean time,

car was completely stock and put these parts on, and increased the boost, and it feels the same

very odd. Any ideas?

think i might, even though there was no aftermarket ecu, it should have made some difference, definetly drive better

really annoyed, was seriously looking forward to taking it for a mad run,

HERE'S MY ADVICE DUDE..and by all means...PLEASE LISTEN!

You're dissapointed right..well so was I.

I had done the exact same mods..and had the exact same faults..

Spitting sound can be either or both of these...

- Spark plugs (Regap them to .8mm)

- Your car is R&R mode (Rich and retard)...your car will do this when a rise of boost is present. The factory ECU is too Safe to let your car run with the extra boost so what it does is put the car in R&R mode which pushes more fuel through your engine to cope with the extra boost so your car is not leaning out.

Be warned..leaving your car in this mode for too long will kill your fuel pump as the pump will be running pretty much from 80% to 100% all the time.

My suggestion and what I did is/are-

- Walbro intank fuel pump rated 550hp

- CAI (cold air intake)

- ECU tune by Toshi $400 road tune. You WILL be amazed by how much more power your car will have...

All in all should cost you an extra $550 - $800 depending on fuel pump.

Stock turbo is capable of around 200rwkw with right mods and tune...

also might want to invest in a adjustable exhaust cam retard @ 4 degrees to move the torque range down low.

This will make boost hit @ 2700rpm with full boost @ around 3800rpm....and it won't drop AT ALL..

Have fun.

RJ

as mentioned above...coil packs

the ignition is not coping well with your increased boost levels.

i was in the exact same spot as you...was spitting like a crazy bitch at around 5250 to 5500rpm.. cleaned 02 sensors, changed plugs, checked fuel, everything. the coil packs on rb20/5's are very brittle and tend to get go after awhile (they are 10 yr's old now) .

SplitFire Coilpacks ~$600 ish will changed your world babycakes :P

listen to me very carefully mate, ive built enough R33's to warrant this information being true and correct

go and buy some coilpacks, JJR, superspark/splitfire, whatever your heart desires, ive ran all three, they are all the same..

then disconnect your battery, pump your brakes for 2 mins solid on and off, with the battery disconected, then leave battery off all night, reconnect in the morning and then drive your car as hard as you can

i suggest doing the ecu reset (by disconnecting the battery like i said) with a full tank of good fuel, vpower etc etc and octane booster

goodluck, had this problem in every 33 ive owned and most of my other 25 powered cars when i started doing mild mods like this

Yep coils packs, you can use the short cuts (gapping plugs) but it's not the best way to go about things.

When you get to much higher boost levels you may have to gap down, but with your current set up you'd be better off with

good coils and a gap of 1.1..It'll rev better especially around the top end.

Missing all the time / sounds like a wrx = your coil packs or harness.

That's what mine does... not all the time but only sometimes... can happen at any revs even when idling though... here's the topic: http://www.skylinesaustralia.com/forums/R3...rx-t247304.html

Oh yes...forgot coilpacks..

And reset ECU!!

Resetting is a must if your car is in R&R mode. Only way to get rid of it.

But if you want the most out of your mods i'd suggest getting your computer re-mapped or get an Apexi-SAFC...atleast something to even out the boost and fuel levels!

With the tune you could gain 20-30rwkw depending on upgrades...it doesn't sound like much..but trust me it is very noticeable!

SS's...XR8's....pffft....you'll beat them EASY by mid 2nd Gear Everyday...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...