Jump to content
SAU Community

Recommended Posts

  • Replies 208
  • Created
  • Last Reply

Top Posters In This Topic

a mate did this for me when he just started tattooing

My brother has tattooing equipment and him and his missus has tattooed each other. Some of their tatts are just so 'backyard' its not funny.

No way in hell I'd let him, or any mate, with no experience tattoo me. :P

My brother has tattooing equipment and him and his missus has tattooed each other. Some of their tatts are just so 'backyard' its not funny.

No way in hell I'd let him, or any mate, with no experience tattoo me. :P

does it look that bad dude! i thought he did a good job for some who had only been doing it for awhile, plus they all have to start some where...

and by the way he works at ink wizard now!

does it look that bad dude! i thought he did a good job for some who had only been doing it for awhile, plus they all have to start some where...

and by the way he works at ink wizard now!

I was referring to my brother. He doesn't work at any tattoo shop. He's had no training and he has no artistic flair at all. If he wants to tattoo people from his house, thats fine as long as he buys some sterilising equipment, which he doesn't currently have, but I'd still rather a professional do mine.

:P

btw Nene, where are those pics? Can you email them to me?

ok, so tyson at ink wizards did my tat this arvo... looks perfect!!

now, do i wrap it or not? heard mixed opinions.....

Bastard. I thought it was 6pm tonite. I was going to swing past and give you shit :P Stole my thunder! :)

Just keep the cream on it. Don't worry about wrapping it up. I've had 7 tattoo sittings now and never wrapped mine. All the artists' recommendations were to put cream on it 'regularly', do not get sunburnt, do not pick at scab.

If it itches like mad, deal with it :P

After 1.5-2 weeks, it'll be all good.

Going to Vilis tonite to show it off? :D

ok, ill be wearing a jacket out tonight so that should be of some help along with the cream...

who said tatt's hurt? pansies :P

You're the pussy :P

Get tatts down both arms ... then we'll talk pain mother-freaker! :)

it is bigger than i planned, takes up half my fore arm!!!

colour and all....

cant go to villies, got my mums 40th dinner

will keep the pro-tat on it!!!

missus hasnt seen it yet, will wait til i get to mu olds place :)

(safe in my mums arms lol)

it is bigger than i planned, takes up half my fore arm!!!

colour and all....

cant go to villies, got my mums 40th dinner

will keep the pro-tat on it!!!

missus hasnt seen it yet, will wait til i get to mu olds place :)

(safe in my mums arms lol)

So ... the missus doesn't know about the tattoo? :P I so want to come to ya mother's 40th now to see the reaction :P

Show it off ya big girl! :D

lol, ill see you at the bartley tav at 7 :)

dw, will roll my sleeves up once her head has finished spinning around on her shoulders haha

na she wont mind, its not that bad, best of all, my bosses gave me the thumbs up!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...