Jump to content
SAU Community

Recommended Posts

hey guys i recently bought a freshly imported uncompliable r32 gtr for parts for another car im building... complete drivable un stuffed with car i basically have the car as it was bought in japan nothing has been removed

has a few minor mods but still std ecu and the like .8 bar boost set on the boost controller

to say the thing runs great is an understatement it does not miss at all drives great and bloody hammers in the short few hundred metre drives up the road it had when unloading it off the trailer i have had it hot and cold several times

but i did a compression test because when you hold the revs up at about 3000 or so for about 30 seconds or so a small amount of smoke starts to exit the exhaust not blue not black just smoke... no real colour to it thats noticable

compressions as tested 30 mins ago with my new snap on compression tester are as follows

1-150

2-120

3-149

4-146

5-139

6-149 all in psi

number 2 is my main concern , now im wondering is it common that engines develop sticky rings if for instance theyre sitting in a yard for ages in japan or on docks or ship etc because this car has really badly surface rusted brake rotors so it hasnt been driven properly in a long time ... ive tried sprayinga good dose of crc down all the cylinders and left it a few days then warmed it up again and re tested and this hasnt massivly changed the readings if at all...

i do know about the old teaspoon of engine oil then retest it and if it comes up its stuffed ringlands or rings etc ,i did this quickly with crc and yes it did come up but this would also cure sticky rings i havent done it properly to properly assess it yet

im just not totally convinced that the engine is broken as it really runs too good... with the filler cap off there is NO blowby at all...with loading it up on the dyno to get it hot loaded up and things like that would that help if it is sticky or is it just rooted....opinions???

Edited by WHITE R32
Link to comment
https://www.sau.com.au/forums/topic/247801-rb26-engine-compression-woes/
Share on other sites

I hope you have serviced your car and warm'd up the engine before started trashing it.

At the minimum you should replce your oil and oil filter, probabaly a good idea to change th fuel filter as well and flush the radiator.

Get a leakdown test done, it'll be more conlusive.

I hope you have serviced your car and warm'd up the engine before started trashing it.

At the minimum you should replce your oil and oil filter, probabaly a good idea to change th fuel filter as well and flush the radiator.

Get a leakdown test done, it'll be more conlusive.

i diddnt "trash" it it was well and truly warm... im not totally dumb :D i just wanted to see what i was like comming onto boost etc... 1 and 2nd gears only and not flat out

im not going to go and perform a full 100000km service on a car that im just using for parts

i do know a fair bit about cars im not looking for service advice as such... more directed at the sticky rings theory/if imported cars that have sat for ages come good after a while of use in specific cases like mine

i do plan on a leakdown test later next week but cracked piston broken ringland rooted rings sticky rings will all give the same result there too

thanks for your reply:)

Edited by WHITE R32

IF the sticky ring theory is right (i've got no idea) then try using Delvac-1 at your next oil change. Its a mixed fleet oil (can be used in diesel as well) fully synthetic, with excellent cleaning properties. I use it as my regular oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
    • Today in Skyline arts and crafts!! I’ve made some progress.    had to put extra notes in there so I don’t stuff it up 😂
    • This sounds like me. And then why I leave shit that I had previously hobbled together broken. Lately I've changed strategies to "If I don't want to justify the money on decent stuff, I'm not going to justify hobbling it together". I'm still for DIY, but DIY it properly is more my thing. However, I am terrible on not setting up backups still... Which reminds me, I need to go backup some of my work VM machines... Oh, it's also why I've become a lover of building things into Docker Containers... Then I just need a machine that can run docker, and bam, that specific system is up and running, on the specific versions of everything I need for it to run (In the event a change in required software version breaks something else). Also, these days, my steep learning curves are spent with work related stuff, and on very varied projects, that my want to do other random projects like build a dashboard for my own car has dwindled away to "I just want the car running", which is my current PITA, as I'm getting the Landcruiser usable again, and it has just been non-stop the past 6 to 8 weeks of buying parts, and working on it. Oh, and tools that are meant to be fit for purpose... And they break, because 25 year old 4WD decides it's stronger... But by the time I have it ready to roll back out the drive way, nearly all the stuff in it will have been touched and serviced, so the damn thing better give me NO FREAKING ISSUES, for at least the next 50,000KMs! Just redone whole front of the motor, and resealed the up top stuff, replaced a bunch of things getting perished, new timing belt done, water pump, lower timing cover (Toyota diesel engine runs timing GEARS for the bottom half the motor, and a timing belt from halfway up to the top), new harmonic balancer, fix up the alternator, new thermostat, full swivel hub rebuild, new bearings and seals front and back, steering box rebuild, new battery, and today, it turns out a rear shock has let go, so four new shocks are about to go on order, and that will leave me with after the next run of work, to see if I need to order just a brake caliper re-seal, or if I'll need new pistons in them too. Oh, and I'll finish welding in the new floor sheet metal shortly too. Presently I just want it finished already... But once all the above is done, I still need to fully service diffs, gearbox, transfer, and motor. Then flush and bleed the clutch, and flush and bleed the brakes. But enough about our waffle, back to Duncan's heat problems... I think for Duncan he just gets a thermoswitch, and a manual switch to run some water misters. Thermo so it's only on above certain temps, and the manual switch so it can be turned off even if it is above certain temperatures. IE, switch on for "I'm now on track", then it doesn't need any "smart" computers that might try and do things wrong. And switch the thing off completely on the cool down lap, so when he stops in pits, there's not even a possibility of it dripping any water out to get him in trouble.
    • So I ran into the same problem. I got stuck in the cycle of again of putting putty sanding it, putting putty sanding it, because of a low spot. And notice my block is not completely flat with the panel, even though it's a long block. My panel is slightly curved. Is this an issue? Do I need something that matches the door perfectly, or no?    I do have the smaller flexible block that covers the width of the repair just not the length, I was experimenting with it again to but seems to be the same issue
×
×
  • Create New...