Jump to content
SAU Community

Recommended Posts

he replied, saying that he would pass it up the food chain to managment....

ill bet any money that they are just watching the reaction on here, to gauge what position that they should take.

back on topic, my latest mod is fresh oil n coolant... about to slap in some hektik NGK plugs

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Stock-ish looking side skirts & rear pods

Detectable? I'm guessing yes (if they really wanted too), but so far cops around my area still sees my car as another "camry"... all good so far :banana:

i gota clarion stereo go's pretty good it can be modded to say what eva scrolling text you want on the screen such as "highly modified stereo" with the stock speakers in there and no amp i think it can pull 5db enough to let the people in the rear seat know what your listening to :blink:

Edited by Inline 6
my latest mod is fresh oil n coolant... about to slap in some hektik NGK plugs

LOL same, had engine and gearbox oils changed, new plugs and a new clutch.

Thats probably all I'm going to spend money on now, just maintinence. It drives how I want it so I don't think anymore mods are needed.

Edited by AndrewJZX100

mine is fairly stock but it gets oils and filters changed on a reg basis only done about 18.000 ks in 3 1/2 yrs dosent get driven much almost time for a change lol . thinking of maybe a nice aristo would be nice ...........puts on flame suit lol

car is at doyles atm getting guards pumped for new rims, should be able to show the car off at the ns.com cruise. then going to wheelworx to get tyres fitted. and friday getting -4.0 degrees camber dialed in, yes -4.0.. lol shoe horning the rims under the car.

Edited by steveP
Lol did you pick up a cheap Excel?

nah i dont care how cheap those things are id rather walk

i bought a ae92 manual corolla :D

i bet its 10x less safe then my old 32 and i wont even get looked at twice init!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...