Jump to content
SAU Community

Recommended Posts

Trust me when I say the struts can be bouht quite cheaply (roughly $40 each) from any supercheap/autobarn/bursons store. If they can't find the strut your after "because its an import and we don't keep that information" measure the diameter of the black rod, the fully opened length and the fully closed length (nomally the length of the largest tube plus the plastic bit that connects to your bonnet). With those measurements they should be able to come up with a match.

Stay away from wrecked cars - you have no idea how old/worn the struts are in those.

Reconditioning is not as good as replacing in my opinion and its not that expensive to replace them.

Link to comment
https://www.sau.com.au/forums/topic/248029-my-cefiros-hood/#findComment-4305583
Share on other sites

could use a piece of wood to keep it open if you're a tightwad :P

What about say replacement struts for a VP commodore (just having a stab in the dark here)

a mate has the same problem on his A31, except it stays open for a little while then bashes him on the head as he goes to remove coil packs etc. always good for a laugh!

Link to comment
https://www.sau.com.au/forums/topic/248029-my-cefiros-hood/#findComment-4306098
Share on other sites

could use a piece of wood to keep it open if you're a tightwad :D

What about say replacement struts for a VP commodore (just having a stab in the dark here)

a mate has the same problem on his A31, except it stays open for a little while then bashes him on the head as he goes to remove coil packs etc. always good for a laugh!

YES!

Just when you think they are gonna work, you check your oil or coolant levels and smack, cops ya in the back of the head! haha, happened to me a few times.

I sent an email a while ago about them, down somewhere in Glenelg a bloke said to me I think it was about $58.60 a strut to regas. But I wasnt too sure what other options there could be. :) Plus, its not a huge problem anyway, allows me to carry a piece of wood in the boot. lol.. :)

Link to comment
https://www.sau.com.au/forums/topic/248029-my-cefiros-hood/#findComment-4308986
Share on other sites

i used monroe ones cost 50 bucks each car is at the paint shop now if you can wait till thurs ill give ya the part no they actually lift the bonnet 15mm higher than stock so they are a performance improvement lol

thanks mate, if u do get some time, please let me kow the part number.

cheers

Link to comment
https://www.sau.com.au/forums/topic/248029-my-cefiros-hood/#findComment-4309866
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...