• Content count

  • Joined

  • Last visited

  • Feedback


Community Reputation

1 Neutral

About rayj

  • Rank
    Rank: RB25DE

Profile Information

  • Location

Recent Profile Visitors

4,633 profile views
  1. Hey I'm looking for a stock Cefiro exhaust. Let me know if you have one for sale. Thanks
  2. Wanted: RB20 Coil Pack Loom After a standard RB20 coil pack loom. PM if you have one available. Thanks
  3. Wanted: RB20 Coil Pack Loom After a standard RB20 coil pack loom. PM me if you have one available. Thanks
  4. Looking for a RB20 Coil Pack Loom. Let me know if you have one available. Cheers
  5. Some parts for sale: RB20 Stock 10psi Turbo Wastegate Actuator $70 RB20 Ignitor (Cefiro and Laurel. Suit RB20 engines which use a square type plug. Will not connect to a rounder R32 plug) $70 RB20 AAC Valve (Cefiro and Laurel. Suit RB20 engines which use a square type plug. Will not connect to a rounder R32 plug) $50 RB20 Genuine Coolant Hose (Brand new. Will fit any RB20. See diagram for fitment) $30 RB20DET Automatic Transmission ECU (TCU) $50 RB20 RB25 RB26 Coil Pack Bracket $10 Random: CA18DET Coil Pack Bracket $20 Cefiro Driver's Side Plastic Panels $20 Located Enfield, Adelaide. PM me if you're interested. 
  6. WTB: rb20 or rb25 s1 coil pack loom. And rb20, rb25 s1, rb26 Splitfire coil packs Looking for a RB20 or RB25 S1 coil pack loom in good condition. Also looking for a set of Splitfire coil packs for RB20/RB25 S1/RB26 in good condition. Let me know if you have any of these available. Cheers
  7. I've checked for vacuum leaks, cleaned the AFM and tried resetting the TPS again. Same problem continues... What I've noticed with the TPS, if I test it with Consult without the engine running, everything looks good. Closed throttle is approx. 0.5v and throttle switch is closed. As soon as throttle is opened, throttle switch changes to open, and throttle position will gradually rise to approx. 4.0v WOT. However, as soon as I start the car, the throttle switch will immediately move from closed to open even though the throttle hasn't been touched (it's closed). So then I adjust the TPS accordingly while the car is running, so that throttle switch open/closed occurs at the right time, all looks good, but the problem still persists. This doesn't seem right, the output should be the same no matter if in the ON position or engine running. Why is the closed throttle value changing between ON and engine running?
  8. Yep stock setup. Nothing aftermarket engine wise. Pretty sure there's no vacuum leaks, but I'll go over it again, plus the AFM and TPS. Cheers
  9. Thanks for your help. The Throttle body was taken off the car, cleaned thoroughly, then mounted back on with new gasket and torqued to spec. Much the same the entire AAC unit, completely soaked and cleaned thoroughly. The problem still exists
  10. I have this really annoying problem with my auto R32 Gts-t. It only happens when switching from light throttle to no throttle at low speeds. For example, driving in traffic or in a shopping center car park (just tapping the accelerator). As soon as I release throttle, it starts hunting and hesitating, gets all jerky, then snaps back into normal idling. It only happens at light throttle, any ideas? I've check the TPS. I'm getting proper voltage readings, approx. 0.5v closed and 4.0v WOT, and switches between throttle open and closed properly... Is it possible the TPS is at fault even if it's giving proper readings? What else could cause this issue? Thanks heaps.
  11. Thanks heaps man for the video and previous thread. Much appreciated!
  12. Work Meister rims. Clear coat flaking... Hey Just wondering if anybody knows what's happening to my rims and why it's happening? I have a set of Work Meister S1 and the clear coat on the chrome/aluminum is sort of flaking off... Is this possible to fix? Cheers for any info.
  13. That Ceffy in New York looks awesome! Very nice.