Jump to content
SAU Community

Recommended Posts

well organised PGA guys, well done on another great day!!

dont know what happened to my car, still has me miffed a little as to what caused such a drastic lean out, I think the pressure hose blew of the fpr as his readout was only showing 15 psi but my ebc was reading much higher!

havn't confirmed my wideband sensor is stuffed yet but will be getting a new one asap, I think it's reading opposite to what the afr actually is, handy!, I may have cooked it running it in the dump directly in the line of fire!! anyway tuner error, lucky Lee's was fine.

sh*t happens, this is what it makes when fpr hose stays attached i guess, have added fuel in the middle since dyno day but not much, sensor was reading fine! guess I have a spare one now. :)

post-34685-1237435108_thumb.jpg

  • Replies 305
  • Created
  • Last Reply

Top Posters In This Topic

sh*t happens, this is what it makes when fpr hose stays attached i guess, have added fuel in the middle since dyno day but not much, sensor was reading fine! guess I have a spare one now. :)

post-34685-1237435108_thumb.jpg

Nice one gotta be happy with that........

is that the r33 with the stockish looking setup hiding a massive lowmount turbo ? wow!

mine was the silver one parked next to the tent!

:) 380 ;) .........lol Adrain, you should've have pulled that figure for us last Sat

I know what a trip, shoulda seen Garreth's face when i said its a stock unopened engine, funny

was a little embarrased on satdy, the boys expected a good number since i tune a few skylines!

no need to be embarassed Adrian, your tuning results show in Lee's car!

how much more are you planning on squeezing out of the standard internals? or is every day a blessing now? :)

is that the r33 with the stockish looking setup hiding a massive lowmount turbo ? wow!

I think thats my car your refering to, not a massive low mount just a HKS3037 Pro S on standard exhaust manifold.

I might detune it to 350 :laugh: and leave the big boost for the dyno!!

Ha Ha detune 350 show off...........Seriously tho good work mate you deserve it :P you were one of the first (that i know of anyway) to go out on a limb with E85 and the results speak for them selves. Not to mention tuning my car on E85 and making more kw and torque then i ever thought possible from 2.5 litres...... :(

yeah thats not big at all Lee :P

T04Z is big in my opinion Krishy, 3037 is at full boost around 4k and making decent boost by 3k on a 2.5ltr.

Oh and just quickly, Lee, I'll post up my dyno sheet as soon as I get a chance mate.

Hey Matt,

any luck on scanning that dyno sheet mate.

Edited by RB25DETS2

Adrian, congratulations on an awesome result mate. It is exactly what I would have expected from a GT3582R running E85 at 24-25psi. Mind you, you're not playing fair, when did you add those two extra cylinders? :)

In all honesty, you should have killed us at the PGA dyno day. From what I've read and hear on the grapevine the GWW Mainline reads some what higher than the Willall Mainline, in the vicinity of 15-20+rwkw and in some cases even more*. You have 400rwkw potential if you put it on the GWW dyno... go on, stick it on there mate, show us 400+rwkw - it will also help to show the difference between the two dyno’s.

An ex-work colleague of mine, and one of his mates, put their Renault Clio Sport 182’s on the GWW dyno and saw figures of 109fwkw and 103fwkw. At some stage later down the track, they then put the cars on the Willall Mainline, the results were in the 80's and high 70's.

Based on the above, and until I see otherwise I reckon my car is making around 340-350rwkw. Which I think I can live with, as lowly as that figure is... in comparison to Adrian’s rocketship!

Here’s my dyno sheet from the PGA dyno day. The engine has not even looked like suffering detonation running as lean as lambda 0.86-0.88. Also take note that my peak torque figure is down on yours, Lee. Boost comes on earlier and hits harder than mine so I’m guessing that’s the main factor.

post-81-1237612163_thumb.jpg

Just a quick one for Lee and Adrian. Guys, what brew of E85 are you using? The 'soon to be gone???' ENFFUE blend?

I have some new E85/98RON that I'm keen to try out when I get some spare time. Be interesting to know if either of you guys have used this stuff already?

In all honesty, you should have killed us at the PGA dyno day. From what I've read and hear on the grapevine the GWW Mainline reads some what higher than the Willall Mainline, in the vicinity of 15-20+rwkw and in some cases even more*. You have 400rwkw potential if you put it on the GWW dyno... go on, stick it on there mate, show us 400+rwkw - it will also help to show the difference between the two dyno's.

Mine car made more power at Willall (316rwkw) than it did at GWW (311rwkw) with no mods in between and with a half of a degree temp difference between the two days.

Mine car made more power at Willall (316rwkw) than it did at GWW (311rwkw) with no mods in between and with a half of a degree temp difference between the two days.

Thanks for info' Chad. Much appreciated.

Well, it would appear that it's inconclusive as to either dyno reading higher or lower. Ignore my previous statement, I'll take my 366rwkw figure on face value.

At the end of the day a dyno figure is just a number, a dyno day is just a bit of fun, and a dyno is just another tool for use in the automotive industry.

What we really neeed is a drag strip. Then we could put our power to good use.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...