Jump to content
SAU Community

Recommended Posts

So I had my car in today at EFI performance on the gold coast. Great bunch of blokes, very proffesional and excellent prices. I had a nistune done and im absolutely stoked both with the chip, the performance I gained and seans (i think its sean its a bit late and im crashin) ability to tune these chips. For all you who dont know sean learnt to tune from possibly the best and one of the most well known tuners Matt Spry.

The nistune chip alone performs far better than any power FC you would be able to get your hands on as long as your not chasing over 500hp.

I will post up my dyno results as soon as possible, as its too late to do it now I will get onto it tomorow. But ym 34gtt before the tuning began was running extremely rich during the middle of the power curve causing the car to miss fire at around 5000rpm but the car gained today 40rwkw's from the nistune making 180rwkw's on an automatic gear box with the following mods.

FMIC

Apexi Pod

Turbo back exhaust 3"

AVCR boost controller on 13psi

HKS Fuel Pump (on teh standard nissan flow rate for the car)

Turbosmart Fuel Reg

Splitfires

HKS SSQV

So next step is fuel rail with 550cc injectors and turbo (which im yet to decide on which avanue img onig to take)

But all in all. EFI offered both excellent customer service, there allr eally down to earth blokes whoa re willing to explain stuff thuroughly. And they certainly know there cars. And on another note there about to move to yatala which is going to make there shop more accessible for all you brissie boys and girls.

Nistune cost $850 all up including the chip for 395 and 170 an hour on the dyno. Fraction of the price of a Power FC and far superior in my opinion if your not chasing any rediculously huge numbers.

Edited by Sammy34
Link to comment
https://www.sau.com.au/forums/topic/248718-nistune-efi-performance/
Share on other sites

yes a fellow member from here has put me on2 them, i'v spoken with sean,

it's just a matter of saving the money 2 get the work done now.

but the chips deffinatly sound like they r worth a go.

sammy did u get the 32 ecu or the vg30(i think) one?

yes a fellow member from here has put me on2 them, i'v spoken with sean,

it's just a matter of saving the money 2 get the work done now.

but the chips deffinatly sound like they r worth a go.

sammy did u get the 32 ecu or the vg30(i think) one?

vg30 chip mate, number 4 chip

I have the same power as you with less mods. But running a power fc tuned by Mark at godzilla. Maybe he's the difference?

There could be a number of things that cause that not particularly the tuner. Some cars pull some numbers out of there arse for no reason. But a 40kw gain at the wheels from just the chip was a huge increase for my car. But heres the difference between a power FC and nistune. The nissan computer is more intelligent than any aftermarket computer your going to be putting in your car so why get rid of it? And im assuming that your car would be a manual if your running a power FC and thats why you would be making bigger number on less mods. Fuel pump and the fuel reg dont give me power just allow my car to get to my goal of 250rwkw's without any fuel delivery problems.

220rwkw with practically the same mods.. ect..except RB20 POWAH :D lol s 3" split dump to a straight through zorst, splitfires, boost tee, big fuel pump & regulator, fmic, stock 25turbo @ 12psi remapped chip 110$ (posted) and $50 to put new chip in n a dyno tune.. to more fine tune it was $180 ;) $350? ftw! ppl are liiek wtfh4x considering the basic bolt on mods iv done :P lol gl with the 34 brother ;)

Good effort Sammy, good to see.

And as for the comparing issue, you can only compare if you run both your cars on the same dyno at the same time, no point saying I got X @ so and so...it doesn't work like that :D

I pulled 187kw on a dyno that I use a bit, went back a few months later and pulled 147kw with no change in performance (mainline had been out to service and settings had changed) after tuning the car was up to 188kw (40kw gain) and I know for a fact if I throw it on a Dyno Dynamics I'll be getting around 230kw+

Dynos are awesome tuning tools and aren't good for comparisons as none follow the same setup or standards :P

Good effort Sammy, good to see.

And as for the comparing issue, you can only compare if you run both your cars on the same dyno at the same time, no point saying I got X @ so and so...it doesn't work like that :D

I pulled 187kw on a dyno that I use a bit, went back a few months later and pulled 147kw with no change in performance (mainline had been out to service and settings had changed) after tuning the car was up to 188kw (40kw gain) and I know for a fact if I throw it on a Dyno Dynamics I'll be getting around 230kw+

Dynos are awesome tuning tools and aren't good for comparisons as none follow the same setup or standards :P

+1

I'm getting my car tuned with sean in the next couple of days and im really excited.. i agree they are definitely a very switched on bunch of blokes, sean, rick and troy..... i would definitely recommend anyone looking for a new computer and a sick tune give them a call!! :P

imo nistune ecu's are great value for money and will work as good if not better than power fc if you work with it not against it...

numbers mean nothing, there's that much difference from dyno to dyno its not funny!! and sean tunes a car to make solid power everyday as reliable as possible.

cant wait for my tune ;)

ps. good effort through an auto too :D

Edited by drift barbie

I'm just kinda kickin myself that I didn't hold off a bit longer and get a Vipec...

Oh and my tune is very safe also. Mark was very upfront about how he doesn't like to squeeze every pony possible out of the engine at the risk of possibly harming it.

Oh but I must say with the power fc, I do like having the hand controller :)

Good effort Sammy, good to see.

And as for the comparing issue, you can only compare if you run both your cars on the same dyno at the same time, no point saying I got X @ so and so...it doesn't work like that :)

I pulled 187kw on a dyno that I use a bit, went back a few months later and pulled 147kw with no change in performance (mainline had been out to service and settings had changed) after tuning the car was up to 188kw (40kw gain) and I know for a fact if I throw it on a Dyno Dynamics I'll be getting around 230kw+

Dynos are awesome tuning tools and aren't good for comparisons as none follow the same setup or standards :)

absolutely dan. Im extremely happy with how my car was treated and performed. I guess in the end everyone has there personal preferences with ECU's and as dan would know i did alot of research into how i was going to go about having my cars computer upgraded and in the end this was the best choice I could have made, taking into consideration that my car was an automatic.

So anyways next step is one of EFI's custom fuel rails with 550cc sard top fed injectors and some form of turbo... hahaha. Maybe a gt3071, not sure yet but will post up after its all done and get up a new dyno result.

hmmm... Do they only tune these nistune chip thingis? Or will they do a powerFC as well?

Might be worth getting a quote from them, im in the market for a tune late december (if anyones open) or early january.

they do alot of different ecu's. Haltech, power fc, wolf, nistune... just give them a call and tell them what your looking for and they will be more than happy to help you out.

Thank's for the kind words Sam and great to see you happy with the outcome.

It isnt about comparing what ECU's are better, who tune's what on what dyno or your car make's more power than mine.

We just want to see good results from your package within your budget.......

Edited by EFI Performance

I spoke to these guys, they seemed pretty switched on. Their tuning is a bit more expensive then most other places, but on the flip side, you often get what you pay for in tuning.

Im waiting on a quote back from them regarding fuel parts to support the power figure I named to the tuner, I'm hoping its competitive as I did quite like the sound of their workshop over the phone and I have heard nothing but good things, but if its significantly more expensive then the competition, well I don't have a bottomless pit of money :(

So I had my car in today at EFI performance on the gold coast. Great bunch of blokes, very proffesional and excellent prices. I had a nistune done and im absolutely stoked both with the chip, the performance I gained and seans (i think its sean its a bit late and im crashin) ability to tune these chips. For all you who dont know sean learnt to tune from possibly the best and one of the most well known tuners Matt Spry.

The nistune chip alone performs far better than any power FC you would be able to get your hands on as long as your not chasing over 500hp.

I will post up my dyno results as soon as possible, as its too late to do it now I will get onto it tomorow. But ym 34gtt before the tuning began was running extremely rich during the middle of the power curve causing the car to miss fire at around 5000rpm but the car gained today 40rwkw's from the nistune making 180rwkw's on an automatic gear box with the following mods.

FMIC

Apexi Pod

Turbo back exhaust 3"

AVCR boost controller on 13psi

HKS Fuel Pump (on teh standard nissan flow rate for the car)

Turbosmart Fuel Reg

Splitfires

HKS SSQV

So next step is fuel rail with 550cc injectors and turbo (which im yet to decide on which avanue img onig to take)

But all in all. EFI offered both excellent customer service, there allr eally down to earth blokes whoa re willing to explain stuff thuroughly. And they certainly know there cars. And on another note there about to move to yatala which is going to make there shop more accessible for all you brissie boys and girls.

Nistune cost $850 all up including the chip for 395 and 170 an hour on the dyno. Fraction of the price of a Power FC and far superior in my opinion if your not chasing any rediculously huge numbers.

dont suppose you know anyone that has a standard r34 computer that they dont want - i need one for my car

Thank's for the kind words Sam and great to see you happy with the outcome.

It isnt about comparing what ECU's are better, who tune's what on what dyno or your car make's more power than mine.

We just want to see good results from your package within your budget.......

what whitey said :thumbsup:

I spoke to these guys, they seemed pretty switched on. Their tuning is a bit more expensive then most other places, but on the flip side, you often get what you pay for in tuning.

Im waiting on a quote back from them regarding fuel parts to support the power figure I named to the tuner, I'm hoping its competitive as I did quite like the sound of their workshop over the phone and I have heard nothing but good things, but if its significantly more expensive then the competition, well I don't have a bottomless pit of money :D

dale bought injectors from them at great prices for quality products ;) and their tuning is not more expensive than other places... their prices are about same as most places these days and you definitely get what you pay for :banana: i know i would rather pay a bit more for a MUCH better safe tune with awesome drivabilty/delivery then save 100 bucks and my car blow the ringlands out of the pistons :) coz its PINGGGIINNN its head off :)

trust.... i learnt the hard way!!

EFI are the only place I will let touch the tuning on my GTR, they are the best bunch of blokes. Sean will speak to you about what you want and tell you which way he thinks is the best route to take to get there. If your serious about your car and want a top quality job give these boys a call...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...