Jump to content
SAU Community

Recommended Posts

Had a run in with a very sturdy post :D

What is it with these sturdy posts, they're everywhere!

post-56452-1229450305_thumb.jpg

...and don't get me started on those concrete walls! :):thumbsup:

post-56452-1229450580_thumb.jpg

...eeech, I just realised how dirty my wheels were. I think I might need to go get a wash myself.

Edited by mr_infamy
Had a run in with a very sturdy post yesterday whilst reversing out of the car wash place. Yes it was after I washed the car and dried it. Yes I have insurance. Yes, I'm an idiot.

Just thought I'd share. :)

a combination of bad luck, inattention and concentration loss; we've all done it. of course, this doesn't make it any easier. don't you hate that "crunching " sound, even before you inspect the damage, you know it is going to cost $$$. no, you are not an idiot, but we all feel pretty stupid after an incident like this. I know I did!!!. the good part of your story is that nobody was injured. good luck with the upcoming repairs.

a combination of bad luck, inattention and concentration loss; we've all done it. of course, this doesn't make it any easier. don't you hate that "crunching " sound, even before you inspect the damage, you know it is going to cost $$. no, you are not an idiot, but we all feel pretty stupid after an incident like this. I know I did!!!. the good part of your story is that nobody was injured. good luck with the upcoming repairs.

Thanks. This is only the 2nd bingle i've had since driving in my entire life so i suppose i should count myself lucky.

Thanks. This is only the 2nd bingle i've had since driving in my entire life so i suppose i should count myself lucky.

+1 for the R34 front end conversion.

When will these be available locally from a supplier in Australia at a reasonable cost? MASA Copies?

I did see some aftermarket front guards (vented I think) available on Ebay (Australia) a couple of weeks ago.

Well, the body panel shop had a look at the damage yesterday, looks like i'll definitely be going through my insurance company. He (body panel guy) said i'll need a new front bar and right guard. I've told him it's a Dayz front bar. Should I leave it to him to source the parts or steer him in the right direction? Any recommendations? Oh yeah, and I should be able to keep the old Dayz front bar... :banana:

When will these be available locally from a supplier in Australia at a reasonable cost? MASA Copies?

They are available now, just not well advertised

Steer the panel shop in the right direct, otherwise the insurance company will get the cheapest option they can.

Your Dayz front bar should have a part number moulded in the back of it. make sure the quote includes the right parts.

If you get to keep your old front bar, get a mould made of it and do all the sad series 2 owners a favour.

Talk to CCubed (andrew) about getting a mould made or a R34 kit if you are interested.

In my drive, which is angled up hill from the property, on the nature strip I installed a really neat solar (God I am an enviromentalist and didn't know it)

light, and the bloody Postman farked it while reversing out after delivering a new bit for the S1.

It happens.

After speaking to insurance assessor and panel beater, I'm going to get a new Dayz front bar (they couldn't find a 2nd hand one anywhere) and panel jobbie fixed in Jan 09 so all's well. Apart from having to pay my excess ofcourse. I've told him i want the front bar back too. :banana:

I wonder where he's ordering the new bar from? Wasn't aware they still made them.

Hugh.. sheesh, you're not having much luck with the S1 are you?

Edited by webng

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...