Jump to content
SAU Community

Recommended Posts

Hay all

Just got defected because my exhaust is to loud 95.9 db and apparently the legal limit is 90 db dose any1 no where i could get a silencer from or if you have 1 for sale i could buy or if there is an easier way to pass

thanks

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/
Share on other sites

I might have something to help you out.

They've really been cracking down lately, setting up in weird and wonderful places and stopping EVERYONE. I've never seen so much of it as in the past 3 weeks.

Observation - they pulled up approx 10-15 cars while they had me stopped and only pulled the the noise meter out on my car. Fortunately it was right on the border and they let me go. In saying that, he was only about 1-2m max from my zorst... I thought it had to be further than that?

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4321415
Share on other sites

the silencers are now illeagle i had a rego muffler made up cost me 100 ages ago i got a recall letter telling me my zorst was to loud i put the rego one on drove over to dickson and the dude said to me is you engine running i said yeah well there isnt much point dooing the sound test then is there I lol'd

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4321868
Share on other sites

the legal limit is 90. I had mine tested at before i could change rego over. mines just on the limit also, which is good to know cause i know they cant do shit.

i think they have to be 1.5m away from the end of the exhuast and in an open environment. if they do it next to a car or something hard then the sound can bounce of it and make it louder than what it is.

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4321930
Share on other sites

Try telling that to the lil Paki bastard who always shows up at RTA check stations.

Haha.

It is always that same bl00dy guy every time! And there is no way what so ever that he is doing it by the book...

When I was defected, I got done for 95db... Right next to a curb surrounded by a V8 SS Ute and a WRX which were both being tested at the same time, yeh, thats fair.. Went over the RTA station and they just looked at the exhaust and it measured 79db...

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4322174
Share on other sites

Hay all

Just got defected because my exhaust is to loud 95.9 db and apparently the legal limit is 90 db dose any1 no where i could get a silencer from or if you have 1 for sale i could buy or if there is an easier way to pass

thanks

I used city exhaust to make a quieter exhaust for rego-easy change over-just the end bit for a standardish if not a bit boring exhaust :(

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4342198
Share on other sites

They've really been cracking down lately, setting up in weird and wonderful places and stopping EVERYONE. I've never seen so much of it as in the past 3 weeks.

Observation - they pulled up approx 10-15 cars while they had me stopped and only pulled the the noise meter out on my car. Fortunately it was right on the border and they let me go. In saying that, he was only about 1-2m max from my zorst... I thought it had to be further than that?

This falls into the same line as my questioning on the speed camera/radar deal. Same idea: any rules and regs to be found on dB requirements/ testing protocol?

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4342263
Share on other sites

I think all this defect rule is there to provide annoyance to people who own imports.

I don't think RTA people really care about defecting your car to reduce road toll, or improve air quality. They probably know that after the inspection, you'll put the loud exhaust back on anyway.

When we were driving down to Batemans bay, an old lady did about 70km/h in a 100km/h zone for a very long time, single lane highway and overtaking lanes were scarce. She was blocking 20 cars behind her. A number of cars did some seriously dangerous overtaking manuveours, narrowly missing oncoming traffic. None of these were Japanese import sports cars and they were not speeding.

Even more serious accidents happen when you fall asleep at the wheels, even with your eyes open.

Again, this is not related to speeding.

My point is, picking on defects on cars is not related to increased road toll on long weekends.

The slogan should be "Difference in speed kills"... not "Speed kills".

Nobody speeds during double demerit time, but they overtake cars a lot more (because there are some really slow drivers on highways) and drive while sleepy. No wonder road toll still remains high on every long weekends.

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4354298
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...