Jump to content
SAU Community

Recommended Posts

hey guyz,

i got 200zr with old NICS rb20det, just wondering main differences between NICS and ECCS? i know turbo is diff but what bout injectors, afm and ECU?

I have an r32 turbo on atm but going the r33 route soon, just wonderin if this is straight bolt on yeh?

also canthe NICS version be epromed or even tuned thorugh ECU?

Also the stock boost controller has an electronic like solenoid connected to the vacuum piping to wastegate, can i wire in EBC around this?

any info much appreciated

Link to comment
https://www.sau.com.au/forums/topic/25015-rb20det-nics-info/
Share on other sites

AFM & ECU different Injectors are same. the main Difference are the inlet manifold. the NICS has a 12 port inlet manifold the head is 6 port, there are two sets of runners on the NICS and only 6 on the ECCS, the theory on the NICS was that the two set of 6 runners are different length under low revs, or take off, the long ports are open giving more torque in theory. After the revs build up the second lot of runners are opened through the butterflys which are shorter for top end power. Turbo yes the RB25 bolts straight on, but you must get the banjos and oil lines as well. Next quetion the NICS chip is currently being worked on by a couple of people to see if it can be re-programmed so will have to wait and see.

Link to comment
https://www.sau.com.au/forums/topic/25015-rb20det-nics-info/#findComment-531580
Share on other sites

Originally posted by R32-GTS

THe injectors are different . Even on the red top. So get some first hand experience before correcting me.

well R31Heaven... be prepared to stand correct by the man with the expirirance :) :bahaha: :bahaha:

Link to comment
https://www.sau.com.au/forums/topic/25015-rb20det-nics-info/#findComment-536105
Share on other sites

Originally posted by rsx84

theres an old hpi mag that has all the ins and outs to do with the red top rb20 if you pm me if you still need info i'll scan it and send it to you.

if it's from a year or two back...

Or maybe longer.

I've got that one (about 5 copies of it :() R31Heaven i think i've showed you a copy of it long ago...

It doesnt really have a lot of stuff in it though.

rsx84, can you scan it and e-mail it to me?

[email protected]

I just wanna make sure i've got the same one.

thanks. ash

Link to comment
https://www.sau.com.au/forums/topic/25015-rb20det-nics-info/#findComment-549146
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...